Fireye Flame-Monitor E120 Flame Safeguard

[{"filename":"MF-00-2-0700-0-051-A_E110_Flame_Monitor.pdf","text":"Flame-MonitorTM\n Flame Safeguard\n\n Flame Safeguards\n E110 (110VAC) & 3G-OTH-02784 (220VAC)\n Total operational control and flame safeguard protection for\n package boiler systems at your fingertips.\n\n The Fireye Flame-Monitor product line brings total operational control and\n flame safeguard protection for packaged boiler systems to your fingertips.\n Modular in structure, the Flame-Monitor system allows you to custom\n design your control system to match your specific burner/boiler fuel firing\n characteristics.\n The complete burner system includes a Flame-Monitor control, keypad/\n display module and a full library of programmer modules, amplifier modules\n and associated flame scanners.\n Current status for each burner plus historical data relating to burner cycles,\n hours of operation, the number and cause of safety lockouts are readily\n available locally on the ED510 keypad/display module. In the event of a safety\n lockout, instant notification is available with the inTouch Wireless Monitoring\n System, keeping boiler downtime to a minimum.\n\n Features\n • Two line display with keypad provides access to current and historical\n burner information.\n • Programmable E300 (110VAC) & E320 (220VAC) Expansion Modules\n provide interlock messages.\n • Extended purge timing via dip switches.\n • Selectable airflow (3-P) proven open to start.\n • Multi-drop connection to Communication Interface via RS485.\n • Modular design.\n • Continuous self-test diagnostics.\n • Modbus communications.\n\nProgrammer Modules\number of A Full Library of Programmer Modules\nrge, air\n The EP Programmer Modules have a number of programmable functions\n de maxi- (extended purge, air flow proven open to start, etc) to provide maximum\nnumber of system flexibility. Fireye offers a number of programmer models to meet the\nus agency various agency requirements:\n • Non-recycle operation\n (EP160, EP161, EP165, EP170).\n • Recycle operation\n (EP260, EP261, EP265, EP270).\n • Non-modulating control\n (EP380, EP381, EP382, EP390).\n\n\n\nammer module as\nogrammer. An EPD\n lights to display basic system operating status, while\n fireye.com\n te ED510 alpha-numeric display module.\n\f Flame Monitor\n Flame Safeguard\n Keypad/Display Module\n\n The ED510 Keypad/Display Module incorporates a two (2) line by sixteen (16) character\n backlit LCD display and three button keypad to provide both operational and comprehensive\n diagnostic information. A remote mounting kit is available to facilitate panel mounting of\n the keypad/display. The ED510 provides a local readout of the following information:\n • Operating sequence status.\n • Flame signal strength.\n • First out annunciation of a safety lockout.\n • Last six lockout conditions (with burner cycle and burner hour time-stamp).\n • Pilot and main flame signal averages.\n • Accumulated burner hours, system hours and burner cycles each with 6 digit range plus\n rollover. Expansion Module\n Keypad/Display Module • Ability to clear stored history.\n Alltwo\n The ED510 Keypad/Display Module incorporates a the above features can be accessed with the push of a button. The E300 Expa\n (2) line by sixteen (16) character backlit LCD display provides additi\n Expansion Modules ing and first-ou\n and three button keypad to provide both operational\n and comprehensive capability for u\n The E300diagnostic\n (110VAC) information.\n & E320 A remote\n (220VAC) Expansion Modules provide additional monitoring\n mounting kit is available to facilitate panel mounting of for up to 16 specific interlock functions. The Flame- interlock functi\n and first-out annunciator capability\n the keypad/display. The ED510 provides a local readout Flame-Monitor\n Monitor control, working in conjunction with the Expansion Module, can display the exact\n of the safety interlock which caused the safety shutdown. The description of each interlock can be ing in conjunct\n following information: with the ED510 keypad/display or PC interface to match your current wiring\n programmed Expansion Mod\n • Operating sequence status. play the exact\n inTouch\n • Flame signal strength.Wireless Monitoring System\n which caused t\n down. The description of each interlock can\n • First out annunciation of a safety lockout.\n When the alarm sounds you need to be informed immediately. You need grammed with the ED510 keypad/display or\n • Last six lockout conditions (with burner cycle\n a device that can intelligently tell you the exact location, exact time to match your current wiring configuration.\n and burner hour time-stamp).\n and exact reason for the shutdown. You need a device that works with\n • Pilot and main flame\n today’s signal averages.\n technology 24 hours a day, 7 days a week and not be a financial\n burden.\n • Accumulated burner hours, system hours and\n burnerThe inTouch\n cycles each Wireless\n with 6 digit Monitoring\n range plus rollover. System was developed to\n communicate\n • Ability to clear directly with up to ten (10) Flame-Monitor or MicroM\n stored history.\n flame safeguard controls at the location. In the event of a lockout, the\n All the above features can be accessed\n information\n with the push is transmitted to you through the nationwide cellular network\n of a button.\n AMPS (Advanced Mobile Phone System) eliminating the need for costly • Immediate Notification of Lockout\n telephone lines. Since inTouch is a cellular device, installation time is\n l System Include:\n greatly reduced.\n • 24/7 Monitoring\n • Direct Interface to Flame-Monitor\nnnection toMessage\n Communicationdelivery Interface\n methods include pagers (alphanumeric, numeric), • or MicroM Controls\n fax, e-mail, PCS, or telephone (voice delivery), making the inTouch • Utilizes Cellular Network-NAAMPS\n n. system easily accessible and therefore reducing downtime. Every 24 • Monitor Up to 10 Devices\n hours, the inTouch system also sends a heartbeat of all monitored\n lf-test diagnostics. • Monitor 4 AC Inputs\n equipment to the central server. Each heartbeat contains specific run • Monitor 4 Dry-Contact Inputs\nmunications. time information such as burner hours, burner cycles, system hours and • Battery Back-Up\n total lockouts. This information, along with the last 90 days of history, is • Service Button, Test Message\n easily accessed from the internet using your personal inTouch account. • 24 Hour Heartbeat Status\n If your application is critical or if your customers demand service you • Low Monthly Service• Charge\n Immediate Notification of Loc\n need to stay inTouch. • NEMA 4 Housing • 24/7 Monitoring\n • Direct Interface to Flame-Mon\n or MicroM Controls\n For more information, please contact your local Fireye Distributor.\n • Utilizes Cellular Network-NAA\n fireye.com • Monitor Up to 10 Devices\n MF-00-2-0700-0-051-A (2024/08) • Monitor 4 AC Inputs\n All trademarks and service marks referred herein are property of their…