Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

Fireye Plant Master for NX6100 and PPC6000 - Multi Burner Controls
FireyeMulti Burner Controls

Fireye Plant Master for NX6100 and PPC6000

Fireye 3G-OTH-02800 adalah Plant Master yang dirancang untuk mengontrol dan mengurutkan hingga sepuluh unit NX6100 atau PPC6000 pada aplikasi ketel uap dan air panas. Panel ini dilengkapi layar sentuh 10,4 inci…

SKU 3G-OTH-02800

Juga terdaftar sebagai: PMSTR6000 · PMSTR 6000

Merek
Fireye
Item
Plant Master for NX6100 and PPC6000
Kategori
Multi Burner Controls
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

Fireye
Models
PMSTR-6000, NX6100, PPC6000
Category
Multi Burner Controls
Approvals
UL Listed

Konten Lembar Data

[{"filename":"MF-00-2-0700-0-009-D_Plant_Master_PMSTR-6000.pdf","text":"Plant Master\n\n\nPMSTR-6000\nMultiple efficiency controller panel with 10”\ntouchscreen interface\n\nThe Fireye 3G-OTH-02800 Plant Master offers sequencing and control\nfor up to ten NX6100 or PPC6000 efficiency controls for steam and hot\nwater plant applications. A 10.4” touchscreen interface is supplied for\nsetup and\nmonitoring.\n\nEach control requires either an NX6330 or NXTSD104 user interface\nsupporting Modbus TCP/IP communications.\nThe 3G-OTH-02800 is supplied in a UL508A package. The same\nfunctionality can also be offered in a user-supplied package via the\nNXTSD104 user interface.\n\nThe 3G-OTH-02800 uses a common header sensor to sequence the\nconnected boilers based upon the system load. .\n\n Utilizes TS350/TS752-2, 4, 8 Fireye temperature sensors or any third party 4 to\n 20ma capable temperature sensor.\n The addition of a PPC6000 is required to interface the 4 to 20mA water sensor\n to CANbus input required by PMSTR.\nFeatures\n • NXTSD104 10.4” color touchscreen\n • IP65/NEMA4 rating\n • UL508A listed industrial control panel\n • Door mounted disconnect with lockout capability\n • 8-port Ethernet Switch\n • Four programmable relays\n • Ready for connection to header pressure sensor via CAN bus\n\n\n\n\nNX6044 Optional Header Pressure Sensor NX6045 Optional Header Pressure Sensor\n • 0-3 Bar (0-43.5 psi) 1/4” • 0-25 Bar (0-362 psi) 1/4”\n • 1/4” NPT connection • 1/4” NPT connection\n • 44mm x 85mm (1.75” x 3.5”) • 44mm x 85mm (1.75” x 3.5”)\n • Quick disconnect cable included with sensor • 5m (16.4’) prewired cable\n\nFor more information, please contact your local Fireye Distributor.\nfireye.com\nMF-00-2-0700-0-009-D (2024/10)\nAll trademarks and service marks referred herein are property of their respective owners.\n Join us on\n©2024 Fireye. All Rights Reserved."}]

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

Fireye Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Fireye 3G-OTH-02800 adalah Plant Master yang dirancang untuk mengontrol dan mengurutkan hingga sepuluh unit NX6100 atau PPC6000 pada aplikasi ketel uap dan air panas. Panel ini dilengkapi layar sentuh 10,4 inci, memiliki rating IP65/NEMA4, dan tersertifikasi UL508A. 3G-OTH-02800 menggunakan sensor header umum untuk menyesuaikan urutan pengoperasian ketel berdasarkan beban sistem, ideal untuk pengaturan pembakar industri yang kompleks.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa fungsi Fireye PMSTR-6000?

Fireye PMSTR-6000 berfungsi sebagai pengontrol master untuk mengelola urutan dan kontrol hingga sepuluh unit NX6100 atau PPC6000 pada sistem ketel uap dan air panas. Panel ini menggunakan sensor header umum untuk menyesuaikan operasi ketel berdasarkan beban sistem, sehingga meningkatkan efisiensi pembakaran.

Apa spesifikasi teknis Fireye PMSTR-6000?

Fireye PMSTR-6000 memiliki layar sentuh 10,4 inci, rating IP65/NEMA4, dan tersertifikasi UL508A. Panel ini dilengkapi sakelar Ethernet 8-port, empat relay yang dapat diprogram, dan siap terhubung ke sensor tekanan header melalui CAN bus. Sensor tekanan opsional tersedia dalam rentang 0-3 Bar atau 0-25 Bar.

Di mana beli Fireye PMSTR-6000 di Indonesia?

Anda dapat membeli Fireye PMSTR-6000 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda dengan aman. Hubungi kami untuk minta penawaran.

Bagaimana cara menghubungkan sensor tekanan ke PMSTR-6000?

PMSTR-6000 siap terhubung ke sensor tekanan header melalui CAN bus. Sensor tekanan opsional seperti NX6044 (0-3 Bar) atau NX6045 (0-25 Bar) dengan koneksi 1/4" NPT dapat digunakan. Kabel quick disconnect atau kabel prewired 5m disertakan untuk memudahkan instalasi.

Apakah Fireye PMSTR-6000 kompatibel dengan sensor pihak ketiga?

Ya, PMSTR-6000 dapat menggunakan sensor suhu pihak ketiga yang mampu menghasilkan sinyal 4-20 mA, selain sensor Fireye TS350/TS752-2, 4, 8. Untuk sensor air 4-20 mA, diperlukan PPC6000 sebagai antarmuka ke input CAN bus PMSTR.

Digunakan dalam

Aplikasi umum untuk Fireye
Power-plant auxiliary boiler — M-Series II controller with UV flame scanner, programmed for gas/oil switchover and flame-presence monitoring.
Refinery process heater — MP100E programmer module managing multi-stage ignition and flame-out shutdown interlocks on high-pressure burners.
Petrochemical facility thermal oxidizer — MAUV1T UV amplifier module processing scanner signal from high-temperature burner housings with immune-response filtering.
Large-scale industrial oven (metal treating) — M-Series II with remote reset capability and dual-fuel solenoid isolation for operator safety and burner protection.
Cogeneration plant fuel-gas burner — Fireye scanner and modular controller stack integrated into BMS with remote monitoring of flame status and controller fault codes.

Fireye Produk

3G Electric memasok Fireye multi burner controls. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Rangkaian Gas & Katup Gas Transformator Pengapian Kontrol Pembakar Suku Cadang Semua Produk

Compatible alternatives & equivalents

Cross-referenced by specification & description
Nexus NXF4000 Parallel Positioning. The Fireye NXF4000 is an advanced burner management controller with an internal flame safeguard, designed to operate burners firing liquid or gaseous fuels. NXF4000 supports up to four servos and two VFD channels per profile, optional touchscreen interface, 15 configurable digital inputs, optional valve proving, thermal shock, hot standby, integrated peer-to-peer sequencing and more. Add-on options include oxygen trim, plant master for centralized control and communication gateway to support most BMS/PLC/SCADA needs
Fireye
Nexus NXF4000 Parallel Positioning. The Fireye NXF4000 is an advanced burner management controller with an internal flame safeguard, designed to operate burners firing liquid or gaseous fuels. NXF4000 supports up to four servos and two VFD channels per profile, optional touchscreen interface, 15 configurable digital inputs, optional valve proving, thermal shock, hot standby, integrated peer-to-peer sequencing and more. Add-on options include oxygen trim, plant master for centralized control and communication gateway to support most BMS/PLC/SCADA needs
Nexus PPC6000 Parallel Positioning. When combined with a Fireye flame safeguard system such as the Fireye BurnerLogix control, the PPC6000 offers the most compact and advanced parallel positioning system available
Fireye
Nexus PPC6000 Parallel Positioning. When combined with a Fireye flame safeguard system such as the Fireye BurnerLogix control, the PPC6000 offers the most compact and advanced parallel positioning system available
MB Series MB600S Burner Control. MB SERIES control has been engineered to meet the operational, safety and reliability requirements demanded by the industrial process heat market. It is a fully integrated control, complete with all functions built into one module, offering the opportunity to greatly reduce cost and space requirements normally required by other non-integrated systems
Fireye
MB Series MB600S Burner Control. MB SERIES control has been engineered to meet the operational, safety and reliability requirements demanded by the industrial process heat market. It is a fully integrated control, complete with all functions built into one module, offering the opportunity to greatly reduce cost and space requirements normally required by other non-integrated systems
Nexus NX6300 Parallel Positioning. The newest member of the versatile 6000 series family of combustion efficiency burner controls that can be configured to control a variety of burner applications
Fireye
Nexus NX6300 Parallel Positioning. The newest member of the versatile 6000 series family of combustion efficiency burner controls that can be configured to control a variety of burner applications
PF Series MBPF-100S Burner Control. The MBPF-100S, MB-600PF, MBPF-200S and MBPF-202S modules provide visual indication and electrical output that signal the user regarding flame presence in a combustion chamber. The module uses Fireye optical ultra-violet scanners and/or flame rods to sense flame presence independently or as components in a burner management system
Fireye
PF Series MBPF-100S Burner Control. The MBPF-100S, MB-600PF, MBPF-200S and MBPF-202S modules provide visual indication and electrical output that signal the user regarding flame presence in a combustion chamber. The module uses Fireye optical ultra-violet scanners and/or flame rods to sense flame presence independently or as components in a burner management system
Nexus PPC4000 Parallel Positioning. When combined with a Fireye flame safeguard system such as the BurnerLogix™ control, the PPC4000 offers a compact parallel positioning system
Fireye
Nexus PPC4000 Parallel Positioning. When combined with a Fireye flame safeguard system such as the BurnerLogix™ control, the PPC4000 offers a compact parallel positioning system

Lainnya dari Fireye

Lihat semua Fireye suku cadang