FLEETGUARD Automotive Fuel Filter: 12 1/8 in Overall Lg, 3 11/16 in Outside Dia, Diesel Fuel
The FLEETGUARD FS1001 is a spin-on fuel/water separator for diesel fuel, with a 12 1/8 in overall length and 3 11/16 in outside diameter. Its plastic media is compatible with Taylor Tools vehicles. 3G Electric…
SKU 3G-OTH-505265
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The FLEETGUARD FS1001 is a spin-on fuel/water separator for diesel fuel, with a 12 1/8 in overall length and 3 11/16 in outside diameter. Its plastic media is compatible with Taylor Tools vehicles. 3G Electric interprets demand and delivers this genuine industrial part across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the FLEETGUARD FS1001 fuel filter used for?
The FLEETGUARD FS1001 is a spin-on fuel/water separator designed for diesel fuel systems. It removes water and contaminants from diesel fuel, protecting injectors and engines in Taylor Tools vehicles and similar industrial equipment.
What are the specifications of the FLEETGUARD FS1001?
The FLEETGUARD FS1001 has a 12 1/8 in overall length and 3 11/16 in outside diameter. It uses plastic media and is compatible with Taylor Tools vehicles. This is a diesel fuel filter/water separator with manufacturer part number FS1001.
Where to buy the FLEETGUARD FS1001 worldwide?
3G Electric supplies the FLEETGUARD FS1001 fuel filter worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us to order this genuine FLEETGUARD part for your diesel fuel system.
How to install the FLEETGUARD FS1001 spin-on fuel filter?
Install the FLEETGUARD FS1001 by lubricating the gasket with clean diesel fuel, hand-tightening the filter until the gasket contacts the mounting head, then tightening an additional 3/4 turn. Prime the system and check for leaks before starting the engine.
Digunakan dalam
Aplikasi umum untuk FLEETGUARDFLEETGUARD Produk
3G Electric memasok FLEETGUARD spin-on fuel/water separators. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









