FLEETGUARD Automotive Oil Filter: B114, LF3314, 3/4"-16 UNF-2B Thread Size, 7 in Overall Ht
The FLEETGUARD B114 is a spin-on oil filter with a 3/4"-16 UNF-2B thread size and 7-inch overall height, designed for Kubota vehicles. It interchanges with Baldwin B114 and FleetGuard LF3314, ensuring reliable…
SKU 3G-OTH-498388
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The FLEETGUARD B114 is a spin-on oil filter with a 3/4"-16 UNF-2B thread size and 7-inch overall height, designed for Kubota vehicles. It interchanges with Baldwin B114 and FleetGuard LF3314, ensuring reliable filtration for compatible applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the FLEETGUARD B114 oil filter used for?
The FLEETGUARD B114 is a spin-on oil filter designed for Kubota vehicles. It provides reliable filtration to remove contaminants from engine oil, helping protect engine components and extend service life. This filter is a direct replacement for Baldwin B114 and FleetGuard LF3314.
What are the specifications of the FLEETGUARD LF3314 oil filter?
The FLEETGUARD LF3314 spin-on oil filter has a 3/4"-16 UNF-2B thread size and a 7-inch overall height. It is compatible with Kubota vehicles and interchanges with Baldwin B114 and FleetGuard LF3314. The manufacturer part number is LF3314.
Where to buy FLEETGUARD oil filters for Kubota worldwide?
3G Electric supplies FLEETGUARD oil filters like the B114/LF3314 for Kubota vehicles worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us to order this filter for your application.
How to install a FLEETGUARD spin-on oil filter?
To install a FLEETGUARD spin-on oil filter, first drain the engine oil and remove the old filter. Clean the mounting surface, apply a thin coat of clean oil to the new filter's gasket, then hand-tighten the filter until the gasket contacts the base. Tighten an additional 3/4 turn. Refill with oil and check for leaks.
Digunakan dalam
Aplikasi umum untuk FLEETGUARDFLEETGUARD Produk
3G Electric memasok FLEETGUARD spin-on oil filters. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
