FLEETGUARD Automotive Fuel/Water Separator: Spin-On, 15 3/16 in Overall Lg
The FLEETGUARD Automotive Fuel/Water Separator is a spin-on fuel filter (MPN FS1216) with an overall length of 15 3/16 in and an outside diameter of 4 9/16 in. It is part of the Haul-Pak series and carries the…
SKU 3G-OTH-597301
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The FLEETGUARD Automotive Fuel/Water Separator is a spin-on fuel filter (MPN FS1216) with an overall length of 15 3/16 in and an outside diameter of 4 9/16 in. It is part of the Haul-Pak series and carries the cross-reference BF1216.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the FLEETGUARD FS1216 fuel/water separator used for?
The FLEETGUARD FS1216 is a spin-on fuel/water separator designed to remove water and contaminants from diesel fuel in heavy-duty trucks and off-road equipment. It is part of the Haul-Pak series and helps protect fuel injectors and engine components from damage caused by water and debris.
What are the specifications of the FLEETGUARD FS1216?
The FLEETGUARD FS1216 has an overall length of 15 3/16 in and an outside diameter of 4 9/16 in. It is a spin-on fuel/water separator from the Haul-Pak series. The cross-reference number is BF1216. This filter is designed for automotive and heavy-duty diesel applications.
Where to buy the FLEETGUARD FS1216 worldwide?
3G Electric supplies the FLEETGUARD FS1216 fuel/water separator to customers worldwide. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time. As a global industrial solutions provider, we source genuine FLEETGUARD parts for your fleet maintenance needs.
How to install the FLEETGUARD FS1216 spin-on fuel/water separator?
Installation of the FLEETGUARD FS1216 follows standard spin-on filter procedures: lubricate the gasket, hand-tighten until the gasket contacts the mounting head, then tighten an additional 3/4 turn. Ensure the mounting surface is clean. Always follow the equipment manufacturer's service manual for specific torque and priming instructions.
Digunakan dalam
Aplikasi umum untuk FLEETGUARDFLEETGUARD Produk
3G Electric memasok FLEETGUARD spin-on fuel filters. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.








