FLEETGUARD Automotive Fuel/Water Separator: Spin-On, 13 7/8 in Overall Lg
The FLEETGUARD Automotive Fuel/Water Separator (MPN FS1281) is a spin-on separator with a 13 7/8 in overall length and 4 3/8 in outside diameter, designed for Thomas Built vehicles. It includes a bowl seal gasket. 3G…
SKU 3G-OTH-505253
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The FLEETGUARD Automotive Fuel/Water Separator (MPN FS1281) is a spin-on separator with a 13 7/8 in overall length and 4 3/8 in outside diameter, designed for Thomas Built vehicles. It includes a bowl seal gasket. 3G Electric interprets demand and delivers this genuine industrial part across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the FLEETGUARD FS1281 fuel/water separator used for?
The FLEETGUARD FS1281 is a spin-on fuel/water separator designed to remove water and contaminants from diesel fuel in Thomas Built vehicles. It helps protect fuel injectors and engine components from damage caused by water and debris, ensuring reliable engine performance.
What are the specifications of the FLEETGUARD FS1281?
The FLEETGUARD FS1281 has an overall length of 13 7/8 in and an outside diameter of 4 3/8 in. It is a spin-on type separator that includes a bowl seal gasket. It is compatible with Thomas Built vehicles and carries the manufacturer part number FS1281.
Where to buy the FLEETGUARD FS1281 worldwide?
3G Electric supplies the genuine FLEETGUARD FS1281 fuel/water separator to customers worldwide. We handle full logistics, customs clearance, and delivery to your location. Contact us to order this part for Thomas Built vehicles.
How to install the FLEETGUARD FS1281 fuel/water separator?
Installation of the FLEETGUARD FS1281 is a standard spin-on procedure. First, lubricate the bowl seal gasket with clean fuel. Screw the separator onto the mounting head until the gasket contacts the sealing surface, then tighten an additional 3/4 turn. Always follow the vehicle manufacturer's service manual.
Digunakan dalam
Aplikasi umum untuk FLEETGUARDFLEETGUARD Produk
3G Electric memasok FLEETGUARD spin-on fuel/water separators. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
