FLEETGUARD Automotive Fuel/Water Separator: Spin-On, 17 in Overall Lg
The FLEETGUARD Automotive Fuel/Water Separator is a spin-on type filter (MPN FS19701) with a 17-inch overall length and a 4 1/4-inch outside diameter, designed for Autocar LLC vehicles. 3G Electric interprets this…
SKU 3G-OTH-505216
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The FLEETGUARD Automotive Fuel/Water Separator is a spin-on type filter (MPN FS19701) with a 17-inch overall length and a 4 1/4-inch outside diameter, designed for Autocar LLC vehicles. 3G Electric interprets this demand and sources the genuine FLEETGUARD part, supporting your fleet maintenance needs across our 14 industrial departments.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the FLEETGUARD FS19701 fuel/water separator used for?
The FLEETGUARD FS19701 is a spin-on fuel/water separator designed to remove water and contaminants from diesel fuel in Autocar LLC vehicles. It protects fuel injection systems from damage caused by water and particulates, ensuring reliable engine performance and extended component life.
What are the specifications of the FLEETGUARD FS19701?
The FLEETGUARD FS19701 has a 17-inch overall length and a 4 1/4-inch outside diameter. It is a spin-on type filter compatible with Autocar LLC vehicles. The manufacturer part number is FS19701. 3G Electric sources this genuine FLEETGUARD part for fleet maintenance.
Where to buy the FLEETGUARD FS19701 worldwide?
3G Electric supplies the genuine FLEETGUARD FS19701 fuel/water separator to customers worldwide. We handle full logistics, customs clearance, and delivery to your location. Contact us to order this part for your Autocar LLC fleet vehicles.
How to install the FLEETGUARD FS19701 spin-on separator?
Installation of the FLEETGUARD FS19701 follows standard spin-on filter procedure: lubricate the gasket, hand-tighten until contact, then tighten an additional 3/4 turn. Ensure the mounting surface is clean. Always consult the vehicle service manual for specific torque and priming steps.
Digunakan dalam
Aplikasi umum untuk FLEETGUARDFLEETGUARD Produk
3G Electric memasok FLEETGUARD spin-on fuel/water separators. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
