FLUKE Stem Insert: Stem Insert, 3/16 in Insert Hole Dia, 1 Holes, Fluke
The FLUKE Stem Insert (MPN 3102-3) is an aluminum temperature calibrator well insert designed for use with FLUKE 9009 Series Drywell Calibrators. It features a single 3/16-inch diameter hole for accommodating a probe…
SKU 3G-OTH-181146
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The FLUKE Stem Insert (MPN 3102-3) is an aluminum temperature calibrator well insert designed for use with FLUKE 9009 Series Drywell Calibrators. It features a single 3/16-inch diameter hole for accommodating a probe stem during calibration.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the FLUKE Stem Insert 3102-3 used for?
The FLUKE Stem Insert 3102-3 is used to hold a probe stem securely inside a FLUKE 9009 Series Drywell Calibrator during temperature calibration. Its single 3/16-inch hole accommodates one probe, ensuring accurate thermal contact for reliable calibration results in industrial and laboratory settings.
What are the specifications of the FLUKE Stem Insert 3102-3?
The FLUKE Stem Insert 3102-3 is made of aluminum and features one 3/16-inch diameter hole. It is designed exclusively for FLUKE 9009 Series Drywell Calibrators. The manufacturer part number is 3102-3, and it is classified as a stem insert for temperature calibration applications.
Where to buy the FLUKE Stem Insert 3102-3 worldwide?
You can source the FLUKE Stem Insert 3102-3 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we provide this FLUKE accessory for temperature calibration needs.
How to install the FLUKE Stem Insert 3102-3 in a drywell calibrator?
To install the FLUKE Stem Insert 3102-3, first ensure the 9009 Drywell Calibrator is off and cool. Remove any existing insert, then place the aluminum stem insert into the well, aligning the single 3/16-inch hole. Insert the probe stem fully for proper thermal contact. Follow FLUKE's generic best practices for calibration setup.
Digunakan dalam
Aplikasi umum untuk FLUKEFLUKE Produk
3G Electric memasok FLUKE temperature calibrator well inserts. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
