Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
FLUKE FLK-FEV150/TY1/FPC Electric Vehicle Charging Station - Electric Vehicle Charging Diagnostic Tools
FLUKEElectric Vehicle Charging Diagnostic Tools

FLUKE FLK-FEV150/TY1/FPC Electric Vehicle Charging Station

FLUKE FLK-FEV150/TY1/FPC adalah alat uji stasiun pengisian kendaraan listrik (EV Charging Station Analyzer) yang dirancang untuk teknisi dan insinyur di Indonesia. Alat ini dilengkapi layar LCD, konektivitas…

SKU 3G-OTH-496580

Juga terdaftar sebagai: FLKFEV150TY1FPC · FLK FEV150 TY1 FPC · FLK-FEV150-TY1-FPC

Merek
FLUKE
Item
FLK-FEV150/TY1/FPC Electric Vehicle Charging Station
Kategori
Electric Vehicle Charging Diagnostic Tools
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

FLUKE
Manufacturer Part Number
FLK-FEV150/TY1/FPC
Type
LCD, Bluetooth Capable
Ports
Type 1 Charger Connector
Includes
TPAK Magnetic Hanger
Standards
SAE J1772
Tool Type
Electric Vehicle Charging Station Tester
Battery Type
AA
Connectivity
Bluetooth Capable
Display Type
LCD
Testing Functions
CP Resistor Measurement

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

FLUKE Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

FLUKE FLK-FEV150/TY1/FPC adalah alat uji stasiun pengisian kendaraan listrik (EV Charging Station Analyzer) yang dirancang untuk teknisi dan insinyur di Indonesia. Alat ini dilengkapi layar LCD, konektivitas Bluetooth, dan port konektor Tipe 1 (SAE J1772) untuk mengukur resistansi CP (Control Pilot) pada sistem pengisian EV. Dengan baterai AA dan TPAK Magnetic Hanger yang disertakan, alat ini menjadi solusi portabel untuk diagnosa peralatan pengisian kendaraan listrik di lapangan.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa FLUKE FLK-FEV150/TY1/FPC digunakan?

FLUKE FLK-FEV150/TY1/FPC adalah Electric Vehicle Charging Station Analyzer yang digunakan untuk menguji dan mendiagnosa stasiun pengisian kendaraan listrik. Alat ini mengukur resistansi CP (Control Pilot) sesuai standar SAE J1772, membantu teknisi memastikan kinerja sistem pengisian EV.

Apa spesifikasi FLUKE FLK-FEV150/TY1/FPC?

Spesifikasi FLUKE FLK-FEV150/TY1/FPC meliputi: tipe layar LCD, konektivitas Bluetooth, port konektor Tipe 1 (SAE J1772), fungsi pengujian CP Resistor Measurement, baterai AA, dan dilengkapi TPAK Magnetic Hanger. Alat ini dirancang untuk diagnosa stasiun pengisian kendaraan listrik.

Di mana beli FLUKE FLK-FEV150/TY1/FPC di Indonesia?

Anda dapat membeli FLUKE FLK-FEV150/TY1/FPC melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih alat uji stasiun pengisian EV yang tepat?

Pilih alat uji seperti FLUKE FLK-FEV150/TY1/FPC yang sesuai dengan standar konektor yang digunakan, misalnya SAE J1772 untuk Tipe 1. Pastikan alat memiliki fungsi pengukuran resistansi CP (Control Pilot) dan konektivitas Bluetooth untuk kemudahan diagnosa. Periksa juga kelengkapan seperti TPAK Magnetic Hanger.

Digunakan dalam

Aplikasi umum untuk FLUKE
Industrial process calibration — Fluke FLK-729PRO 4M automatic pressure calibrator for verifying pressure transmitters and switches
Electrical maintenance — Fluke-77 IV digital multimeter for measuring AC/DC voltage and current in control panels
HVAC diagnostics — Fluke-59 MAX infrared thermometer for non-contact temperature measurement of ducts and equipment
Rotating equipment alignment — Fluke 832 NA laser shaft alignment tool for aligning pump and motor shafts
Temperature sensor calibration — Fluke 9144-E-P-156 drywell for calibrating RTDs and thermocouples in field metrology
Electrical safety testing — Fluke FTP-1 test probe for making voltage measurements in CAT III and CAT IV environments
Not sure this is the right part? Photo-identify it→

FLUKE Produk

3G Electric memasok FLUKE electric vehicle charging diagnostic tools. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari FLUKE

Lihat semua FLUKE suku cadang →
The FLUKE FEV150/TY1 is a handheld diagnostic tool for electric vehicle charging stations. It features an LCD display, Bluetooth connectivity, and a Type 1 charger connector. The tester performs CP signal analysis per IEC 61851 and includes a TPAK magnetic hanger. Powered by AA batteries, it is used for on-site verification and troubleshooting of charging infrastructure
FLUKE
The FLUKE FEV150/TY1 is a handheld diagnostic tool for electric vehicle charging stations. It features an LCD display, Bluetooth connectivity, and a Type 1 charger connector. The tester performs CP signal analysis per IEC 61851 and includes a TPAK magnetic hanger. Powered by AA batteries, it is used for on-site verification and troubleshooting of charging infrastructure
The FLUKE FEV100/TY1 is an electric vehicle charging station tester with an LED display, powered by a 9V battery. It performs PE Pre-Test functions to verify ground connection and safety. Includes a soft carrying case. Complies with FCC 47 CFR 15 Subpart B. Used for installation and maintenance of EV charging stations
FLUKE
The FLUKE FEV100/TY1 is an electric vehicle charging station tester with an LED display, powered by a 9V battery. It performs PE Pre-Test functions to verify ground connection and safety. Includes a soft carrying case. Complies with FCC 47 CFR 15 Subpart B. Used for installation and maintenance of EV charging stations
LCD, Bluetooth-capable diagnostic tool with Type 1 Charger Connector. Performs fault simulation per IEC 61851 standards. Powered by AA batteries. Used for testing and verifying performance of electric vehicle charging stations in commercial and industrial settings
FLUKE
LCD, Bluetooth-capable diagnostic tool with Type 1 Charger Connector. Performs fault simulation per IEC 61851 standards. Powered by AA batteries. Used for testing and verifying performance of electric vehicle charging stations in commercial and industrial settings
This electric vehicle charging station tester features an LED display and operates on a 9V battery. It includes the Fluke FEV100/BASIC Test Adapter and performs GFCI testing in accordance with IEC 61010-1 standards. Designed for verifying safety and functionality of EVSE installations
FLUKE
This electric vehicle charging station tester features an LED display and operates on a 9V battery. It includes the Fluke FEV100/BASIC Test Adapter and performs GFCI testing in accordance with IEC 61010-1 standards. Designed for verifying safety and functionality of EVSE installations
The FLUKE FLK-FEV150/BASIC is an electric vehicle charging station tester with an LCD display and Bluetooth capability. It features a Type 1 charger connector and performs PP resistor measurement. The unit is powered by four AA batteries and complies with SAE J1772 standards. Used for testing and diagnosing EV charging stations
FLUKE
The FLUKE FLK-FEV150/BASIC is an electric vehicle charging station tester with an LCD display and Bluetooth capability. It features a Type 1 charger connector and performs PP resistor measurement. The unit is powered by four AA batteries and complies with SAE J1772 standards. Used for testing and diagnosing EV charging stations
This electric vehicle charging station tester features an LED display and operates on a 9V battery. It tests CP States to verify communication between charger and vehicle, and includes an 80BK Temperature Probe. CE certified. Suitable for maintenance and diagnostics of EV charging infrastructure
FLUKE
This electric vehicle charging station tester features an LED display and operates on a 9V battery. It tests CP States to verify communication between charger and vehicle, and includes an 80BK Temperature Probe. CE certified. Suitable for maintenance and diagnostics of EV charging infrastructure
The FLUKE FEV100/BASIC is a battery-powered tester for verifying ground integrity on SAE J1772 compliant electric vehicle charging stations. It features an LED display and a PE Pre-Test function for safety checks. Powered by a 9V battery, it has no connectivity options
FLUKE
The FLUKE FEV100/BASIC is a battery-powered tester for verifying ground integrity on SAE J1772 compliant electric vehicle charging stations. It features an LED display and a PE Pre-Test function for safety checks. Powered by a 9V battery, it has no connectivity options
This electric vehicle charging station tester features an LED display, Wi-Fi capability, and operates on a 9V battery. It includes red and blue hook clips and a USB port, supporting SAE J1772 (FEV100) standards with PE Pre-Test function. Used for commissioning and troubleshooting EVSE installations
FLUKE
This electric vehicle charging station tester features an LED display, Wi-Fi capability, and operates on a 9V battery. It includes red and blue hook clips and a USB port, supporting SAE J1772 (FEV100) standards with PE Pre-Test function. Used for commissioning and troubleshooting EVSE installations