Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
FLUKE i1010 Clamp-On Current Probe - Clamp-On Current Probes
FLUKEClamp-On Current Probes

FLUKE i1010 Clamp-On Current Probe

FLUKE Current Clamp Probe model Fluke-i1010 adalah probe penjepit arus (clamp-on current probe) yang dirancang untuk pengukuran arus dan tegangan secara simultan. Dengan bukaan rahang 1,1 inci, probe ini mampu…

SKU 3G-OTH-170963

Juga terdaftar sebagai: Flukei1010 · Fluke i1010

Merek
FLUKE
Item
i1010 Clamp-On Current Probe
Part Number
Fluke-i1010
Kategori
Clamp-On Current Probes
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

FLUKE
Manufacturer Part Number
Fluke-i1010
Type
Banana Plug, 1 A to 600 A, 0 V to 600 V
Jaw Opening
1.1 in
Safety Rating
CAT III 600V
Connector Type
Banana Plug

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

FLUKE Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

FLUKE Current Clamp Probe model Fluke-i1010 adalah probe penjepit arus (clamp-on current probe) yang dirancang untuk pengukuran arus dan tegangan secara simultan. Dengan bukaan rahang 1,1 inci, probe ini mampu mengukur arus dari 1 A hingga 600 A dan tegangan dari 0 V hingga 600 V, serta dilengkapi konektor Banana Plug. Dirating dengan keamanan CAT III 600V, alat ini cocok digunakan oleh teknisi dan insinyur di sektor industri, termasuk untuk aplikasi peralatan pembakaran dan ketel uap di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi FLUKE Current Clamp Probe Fluke-i1010?

FLUKE Current Clamp Probe Fluke-i1010 memiliki bukaan rahang 1,1 inci, rentang pengukuran arus 1 A hingga 600 A, dan rentang tegangan 0 V hingga 600 V. Dilengkapi konektor Banana Plug dan rating keamanan CAT III 600V.

Untuk apa FLUKE Current Clamp Probe Fluke-i1010 digunakan?

Probe ini digunakan untuk mengukur arus dan tegangan pada kabel listrik tanpa kontak langsung, ideal untuk troubleshooting sistem kelistrikan di industri, termasuk pada panel kontrol pembakar industri dan ketel uap.

Di mana beli FLUKE Current Clamp Probe Fluke-i1010 di Indonesia?

Anda dapat membeli FLUKE Current Clamp Probe Fluke-i1010 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih clamp probe yang tepat untuk aplikasi industri?

Pilih clamp probe dengan rating keamanan yang sesuai, seperti CAT III 600V pada Fluke-i1010, dan pastikan rentang arus (1 A hingga 600 A) serta tegangan (0 V hingga 600 V) mencakup kebutuhan pengukuran Anda. Bukaan rahang 1,1 inci juga penting untuk menjangkau konduktor yang lebih besar.

Digunakan dalam

Aplikasi umum untuk FLUKE
Industrial process calibration — Fluke FLK-729PRO 4M automatic pressure calibrator for verifying pressure transmitters and switches
Electrical maintenance — Fluke-77 IV digital multimeter for measuring AC/DC voltage and current in control panels
HVAC diagnostics — Fluke-59 MAX infrared thermometer for non-contact temperature measurement of ducts and equipment
Rotating equipment alignment — Fluke 832 NA laser shaft alignment tool for aligning pump and motor shafts
Temperature sensor calibration — Fluke 9144-E-P-156 drywell for calibrating RTDs and thermocouples in field metrology
Electrical safety testing — Fluke FTP-1 test probe for making voltage measurements in CAT III and CAT IV environments
Not sure this is the right part? Photo-identify it→

FLUKE Produk

3G Electric memasok FLUKE clamp-on current probes. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
The FLUKE I1010-KIT is a clamp-on current probe for measuring AC and DC current. It features a 1.1-inch jaw opening and a banana plug connector. Rated CAT III 600V, it is used with compatible instruments for current measurement in electrical systems
FLUKE
The FLUKE I1010-KIT is a clamp-on current probe for measuring AC and DC current. It features a 1.1-inch jaw opening and a banana plug connector. Rated CAT III 600V, it is used with compatible instruments for current measurement in electrical systems
The FLUKE i410-Kit is a clamp-on current probe for measuring AC and DC current without breaking the circuit. It features a 1.1 in jaw opening and a banana plug connector. Safety rated CAT III 600V, it is used for troubleshooting and diagnostics on power distribution panels, motor drives, and industrial equipment
FLUKE
The FLUKE i410-Kit is a clamp-on current probe for measuring AC and DC current without breaking the circuit. It features a 1.1 in jaw opening and a banana plug connector. Safety rated CAT III 600V, it is used for troubleshooting and diagnostics on power distribution panels, motor drives, and industrial equipment
Clamp-on current probe with a 1.2-inch jaw opening for non-contact measurement of AC/DC current from 1 A to 400 A. Features a banana plug connector and CAT III 1000V safety rating. Suitable for use in electrical testing applications such as troubleshooting motors, panels, and switchgear
FLUKE
Clamp-on current probe with a 1.2-inch jaw opening for non-contact measurement of AC/DC current from 1 A to 400 A. Features a banana plug connector and CAT III 1000V safety rating. Suitable for use in electrical testing applications such as troubleshooting motors, panels, and switchgear
Clamp-on current probe for non-contact AC/DC current measurement from 10 A to 110 A. Features a 0.5 in jaw opening and BNC connector. Safety rated CAT II 600V. Suitable for use with compatible meters in electrical testing and troubleshooting applications
FLUKE
Clamp-on current probe for non-contact AC/DC current measurement from 10 A to 110 A. Features a 0.5 in jaw opening and BNC connector. Safety rated CAT II 600V. Suitable for use with compatible meters in electrical testing and troubleshooting applications
The FLUKE i400s is a clamp-on current probe with BNC connector for AC current and AC voltage measurement. It features a 1.2-inch jaw opening and a safety rating of CAT IV 600V. Suitable for non-contact measurements in electrical systems, including troubleshooting motors, panels, and HVAC equipment when connected to a scope or meter via BNC
FLUKE
The FLUKE i400s is a clamp-on current probe with BNC connector for AC current and AC voltage measurement. It features a 1.2-inch jaw opening and a safety rating of CAT IV 600V. Suitable for non-contact measurements in electrical systems, including troubleshooting motors, panels, and HVAC equipment when connected to a scope or meter via BNC
Clamp-on current probe with BNC connector for measuring AC/DC current from 0 A to 2000 A without breaking the circuit. Features a 2-inch jaw opening and CAT IV 600V safety rating. Suitable for use in power distribution, industrial maintenance, and high-energy electrical testing applications
FLUKE
Clamp-on current probe with BNC connector for measuring AC/DC current from 0 A to 2000 A without breaking the circuit. Features a 2-inch jaw opening and CAT IV 600V safety rating. Suitable for use in power distribution, industrial maintenance, and high-energy electrical testing applications

Lainnya dari FLUKE

Lihat semua FLUKE suku cadang →
The FLUKE i800 is a clamp-on current probe with a 2.1-inch jaw opening, designed for measuring AC current, AC voltage, and DC voltage. It features a banana plug connector and a CAT III 600V safety rating. Typical applications include electrical testing and troubleshooting in industrial and commercial settings
FLUKE
The FLUKE i800 is a clamp-on current probe with a 2.1-inch jaw opening, designed for measuring AC current, AC voltage, and DC voltage. It features a banana plug connector and a CAT III 600V safety rating. Typical applications include electrical testing and troubleshooting in industrial and commercial settings
The FLUKE i30 is a clamp-on current probe with a CAT III 300V safety rating. It features a 0.7 in jaw opening and banana plug connector, supporting a current range of 30 A to 20 A and voltage range of 0 V to 300 V. Typical applications include measuring AC/DC current in electrical systems without breaking the circuit, such as troubleshooting motor drives and industrial controls
FLUKE
The FLUKE i30 is a clamp-on current probe with a CAT III 300V safety rating. It features a 0.7 in jaw opening and banana plug connector, supporting a current range of 30 A to 20 A and voltage range of 0 V to 300 V. Typical applications include measuring AC/DC current in electrical systems without breaking the circuit, such as troubleshooting motor drives and industrial controls
The FLUKE i200 is a clamp-on current probe with a 0.8-inch jaw opening and banana plug connector. It measures AC current and AC voltage, and is rated CAT III 600V for safety. This probe is used for non-invasive current measurement in electrical systems, compatible with instruments accepting banana plug inputs
FLUKE
The FLUKE i200 is a clamp-on current probe with a 0.8-inch jaw opening and banana plug connector. It measures AC current and AC voltage, and is rated CAT III 600V for safety. This probe is used for non-invasive current measurement in electrical systems, compatible with instruments accepting banana plug inputs
Clamp-on probe for measuring AC and DC current without circuit interruption. Features a 1.34-inch jaw opening and CAT IV 1000V safety rating, suitable for high-voltage industrial environments such as switchgear and service entrances
FLUKE
Clamp-on probe for measuring AC and DC current without circuit interruption. Features a 1.34-inch jaw opening and CAT IV 1000V safety rating, suitable for high-voltage industrial environments such as switchgear and service entrances
The FLUKE i1000S is a clamp-on current probe with a BNC connector for AC current and AC voltage measurement. It features a 2.1-inch jaw opening and a safety rating of CAT III 600V. Typical applications include non-contact measurement on large conductors in electrical panels, load monitoring, and troubleshooting in industrial power systems
FLUKE
The FLUKE i1000S is a clamp-on current probe with a BNC connector for AC current and AC voltage measurement. It features a 2.1-inch jaw opening and a safety rating of CAT III 600V. Typical applications include non-contact measurement on large conductors in electrical panels, load monitoring, and troubleshooting in industrial power systems
The FLUKE i410 is a clamp-on current probe with a CAT III 600V safety rating. It features a 1.1-inch jaw opening and measures AC/DC current from 1 A to 400 A and voltage from 0 V to 600 V. The probe connects via a banana plug for use with multimeters and data loggers in electrical testing and troubleshooting
FLUKE
The FLUKE i410 is a clamp-on current probe with a CAT III 600V safety rating. It features a 1.1-inch jaw opening and measures AC/DC current from 1 A to 400 A and voltage from 0 V to 600 V. The probe connects via a banana plug for use with multimeters and data loggers in electrical testing and troubleshooting
Clamp-on current probe with BNC connector for non-contact AC/DC current measurement from 30 A to 300 A and voltage measurement from 0 V to 300 V. Features a 0.7 in jaw opening and CAT III 300V safety rating. Suitable for electrical testing, troubleshooting, and power measurement applications requiring a BNC interface
FLUKE
Clamp-on current probe with BNC connector for non-contact AC/DC current measurement from 30 A to 300 A and voltage measurement from 0 V to 300 V. Features a 0.7 in jaw opening and CAT III 300V safety rating. Suitable for electrical testing, troubleshooting, and power measurement applications requiring a BNC interface
The FLUKE i200S is a clamp-on current probe with a BNC connector, rated CAT III 600V. It measures AC current and AC voltage from 0 V to 600 V, with a jaw opening of 0.8 in. Typical applications include non-invasive current measurements on wiring for electrical testing and troubleshooting
FLUKE
The FLUKE i200S is a clamp-on current probe with a BNC connector, rated CAT III 600V. It measures AC current and AC voltage from 0 V to 600 V, with a jaw opening of 0.8 in. Typical applications include non-invasive current measurements on wiring for electrical testing and troubleshooting