FROST KING Window Insulation Kit: 15 ft Overall Lg, 10 ft Overall Wd, Plastic Film
The FROST KING Window Insulation Kit (MPN 2P101527) is a polyolefin shrink and seal window kit supplied as clear plastic film in a 15 ft overall length and 10 ft overall width, with 2 sheets per kit. 3G Electric…
SKU 3G-OTH-515629
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The FROST KING Window Insulation Kit (MPN 2P101527) is a polyolefin shrink and seal window kit supplied as clear plastic film in a 15 ft overall length and 10 ft overall width, with 2 sheets per kit. 3G Electric interprets this demand and delivers it across 14 industrial departments — and we supply far more than is listed — with specialist depth in combustion, pumps and controls as a trust anchor, not a limit.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the FROST KING Window Insulation Kit used for?
The FROST KING Window Insulation Kit is used to reduce heat loss and drafts by sealing windows with clear polyolefin shrink film. It is commonly applied in residential and commercial buildings during cold months to improve energy efficiency and comfort.
What are the specifications of the FROST KING 2P101527 window kit?
The FROST KING 2P101527 kit includes 2 sheets of clear plastic film, each 15 ft long and 10 ft wide. The material is polyolefin shrink film designed for sealing windows. It is supplied by 3G Electric, which sources genuine industrial equipment across 14 departments.
Where to buy FROST KING window insulation kits worldwide?
3G Electric supplies FROST KING window insulation kits worldwide, handling full logistics and customs clearance. As a global industrial solutions provider since 1990, we source and deliver genuine parts across 14 departments, including specialist expertise in combustion, pumps, and controls.
How to install the FROST KING shrink and seal window kit?
To install, clean the window frame, apply double-sided tape around the perimeter, press the film onto the tape, then use a hair dryer to shrink the film until taut and clear. Trim excess film. 3G Electric supplies the kit but recommends following the manufacturer's instructions for best results.
Digunakan dalam
Aplikasi umum untuk FROST KINGFROST KING Produk
3G Electric memasok FROST KING polyolefin shrink and seal window kit. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
