FUJI ELECTRIC Interface Card: FRENIC-MEGA (G2)
The FUJI ELECTRIC PG Interface Card, model OPC-PG2, is a PG interface card designed for use with the FRENIC-MEGA (G2) series of variable frequency drives. This accessory enables encoder feedback for closed-loop…
SKU 3G-OTH-56451
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The FUJI ELECTRIC PG Interface Card, model OPC-PG2, is a PG interface card designed for use with the FRENIC-MEGA (G2) series of variable frequency drives. This accessory enables encoder feedback for closed-loop control applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the FUJI ELECTRIC OPC-PG2 PG Interface Card used for?
The FUJI ELECTRIC OPC-PG2 PG Interface Card is used to enable encoder feedback for closed-loop control applications when installed in a FRENIC-MEGA (G2) series variable frequency drive. It allows precise speed and position regulation in industrial automation systems such as conveyors, hoists, and machine tools.
What are the specifications of the FUJI ELECTRIC OPC-PG2?
The FUJI ELECTRIC OPC-PG2 is a PG Interface Card designed for the FRENIC-MEGA (G2) series VFDs. Its manufacturer part number is OPC-PG2. It supports encoder feedback for closed-loop control. For detailed electrical ratings and wiring diagrams, refer to the FUJI ELECTRIC technical manual for the FRENIC-MEGA (G2) series.
Where to buy the FUJI ELECTRIC OPC-PG2 worldwide?
You can source the FUJI ELECTRIC OPC-PG2 PG Interface Card worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time. 3G Electric supplies genuine FUJI ELECTRIC components for FRENIC-MEGA (G2) drives.
How to install the FUJI ELECTRIC OPC-PG2 PG Interface Card?
To install the FUJI ELECTRIC OPC-PG2, first power down the FRENIC-MEGA (G2) drive and discharge DC bus capacitors. Insert the card into the designated option slot on the drive control board, ensuring proper alignment. Secure it with the provided screws. Connect encoder wiring per the FUJI ELECTRIC manual. Verify closed-loop operation before resuming normal use.
Digunakan dalam
Aplikasi umum untuk FUJI ELECTRICFUJI ELECTRIC Produk
3G Electric memasok FUJI ELECTRIC fuji vfd accessories. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
