FUJI ELECTRIC Replacement Filter Cover: 1 1/2 in (M)NPT Inlet Size
The FUJI ELECTRIC Replacement Filter Cover (MPN C-45) is an inlet filter cover for regenerative blowers, featuring a 1 1/2 in (M)NPT inlet size and a 25 micron filter rating. This component is designed for use with…
SKU 3G-OTH-150931
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The FUJI ELECTRIC Replacement Filter Cover (MPN C-45) is an inlet filter cover for regenerative blowers, featuring a 1 1/2 in (M)NPT inlet size and a 25 micron filter rating. This component is designed for use with FUJI ELECTRIC models 4Z751 and VFD42S.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the FUJI ELECTRIC Replacement Filter Cover C-45 used for?
The FUJI ELECTRIC Replacement Filter Cover C-45 is an inlet filter cover for regenerative blowers. It filters incoming air with a 25 micron rating to protect blower internals from debris. It fits FUJI ELECTRIC models 4Z751 and VFD42S, ensuring reliable operation in industrial vacuum or pressure applications.
What are the specifications of the FUJI ELECTRIC C-45 filter cover?
The FUJI ELECTRIC C-45 filter cover has a 1 1/2 in (M)NPT inlet size and a 25 micron filter rating. It is a replacement part for FUJI ELECTRIC regenerative blowers, specifically models 4Z751 and VFD42S. The manufacturer part number is C-45.
Where to buy the FUJI ELECTRIC C-45 filter cover worldwide?
3G Electric supplies the FUJI ELECTRIC C-45 filter cover worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us to order this genuine FUJI ELECTRIC replacement part for your regenerative blower.
How to install the FUJI ELECTRIC C-45 filter cover on a regenerative blower?
To install the FUJI ELECTRIC C-45 filter cover, first ensure the blower is off and depressurized. Remove the old cover, clean the mounting surface, and align the new cover's 1 1/2 in (M)NPT inlet. Tighten securely by hand, then verify no air leaks before restarting. Refer to the blower manual for torque specs.
Digunakan dalam
Aplikasi umum untuk FUJI ELECTRICFUJI ELECTRIC Produk
3G Electric memasok FUJI ELECTRIC inlet filter covers for regenerative blowers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.










