GASCO Gas Cylinder Regulator: Gas Regulator, Brass, 8 lpm Max Flow Rate, Gas Regulator
The GASCO Gas Cylinder Regulator (MPN PRN5011039) is a brass gas regulator with a CGA C10 connection and a maximum flow rate of 8 lpm, designed as an accessory for calibration gas cylinders. This regulator supports…
SKU 3G-OTH-600390
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GASCO Gas Cylinder Regulator (MPN PRN5011039) is a brass gas regulator with a CGA C10 connection and a maximum flow rate of 8 lpm, designed as an accessory for calibration gas cylinders. This regulator supports precise gas delivery for portable gas detection calibration applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the GASCO Gas Cylinder Regulator PRN5011039 used for?
The GASCO Gas Cylinder Regulator PRN5011039 is used to control gas flow from calibration gas cylinders during portable gas detection calibration. It ensures precise delivery at up to 8 lpm, supporting accurate sensor testing in industrial safety applications across sectors like oil & gas, chemical, and manufacturing.
What are the specifications of the GASCO PRN5011039 regulator?
The GASCO PRN5011039 is a brass gas regulator with a CGA C10 connection and a maximum flow rate of 8 lpm. It is designed for calibration gas cylinders and is manufactured by GASCO. The brass construction provides durability and corrosion resistance for reliable gas delivery in portable detection calibration.
Where to buy the GASCO PRN5011039 regulator worldwide?
3G Electric supplies the GASCO PRN5011039 regulator worldwide, handling full logistics and customs clearance for international delivery. As a global industrial solutions provider, we source and deliver this brass CGA C10 regulator to support calibration gas cylinder applications anywhere.
How to install the GASCO gas cylinder regulator?
To install the GASCO regulator, ensure the CGA C10 connection matches your cylinder valve. Hand-tighten the nut, then use a wrench for a secure seal without over-tightening. Open the cylinder valve slowly and check for leaks with soapy water. Always follow the manufacturer's instructions and safety guidelines for calibration gas handling.
GASCO Produk
3G Electric memasok GASCO accessories for portable gas detection calibration. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
