GASCO Calibration Gas: Air, +/-5% Accuracy, C4H8, Calibration Gas, 105 L Cylinder Capacity
The GASCO Calibration Gas: Air is a +/-5% accuracy calibration gas cylinder (MPN 105ES-77A-150) containing a mixture of Refrigerant R-22 at 150 ppm in an air background, with a 105 L cylinder capacity. Designed for…
SKU 3G-OTH-550377
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GASCO Calibration Gas: Air is a +/-5% accuracy calibration gas cylinder (MPN 105ES-77A-150) containing a mixture of Refrigerant R-22 at 150 ppm in an air background, with a 105 L cylinder capacity. Designed for use with all OEM gas detectors, this C4H8 calibration gas enables accurate sensor verification across industrial safety applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is GASCO Calibration Gas used for?
GASCO Calibration Gas is used to verify and calibrate portable gas detectors across industrial safety applications. This cylinder contains Refrigerant R-22 at 150 ppm in an air background, enabling accurate sensor response checks for all OEM gas detectors.
What are the specifications of GASCO Calibration Gas 105ES-77A-150?
The GASCO Calibration Gas (MPN 105ES-77A-150) has +/-5% accuracy, a 105 L cylinder capacity, and contains Refrigerant R-22 at 150 ppm with air as the background gas. It is designed for use with all OEM gas detectors.
Where to buy GASCO Calibration Gas in worldwide?
3G Electric supplies GASCO Calibration Gas worldwide, handling full logistics and customs clearance for international delivery. As a global industrial solutions provider, we source and deliver this calibration gas to support safety compliance anywhere.
How to use GASCO Calibration Gas for detector calibration?
Attach the regulator to the GASCO cylinder, connect to the gas detector's inlet, and flow the Refrigerant R-22 mixture at the recommended rate. Allow the sensor reading to stabilize, then adjust the detector to match the 150 ppm concentration. Always follow the detector manufacturer's procedure.
GASCO Produk
3G Electric memasok GASCO calibration gases for portable gas detectors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
