GAST Inlet Vacuum Filter: 7 3/8 in Outside Dia, Screw On Connection
The GAST Inlet Vacuum Filter (MPN AJ151D) is an inlet filter with cover for regenerative blowers, featuring a 7 3/8 in outside diameter, screw-on connection, and 1 1/2 in FPT inlet size. This GAST-branded component…
SKU 3G-OTH-138742
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GAST Inlet Vacuum Filter (MPN AJ151D) is an inlet filter with cover for regenerative blowers, featuring a 7 3/8 in outside diameter, screw-on connection, and 1 1/2 in FPT inlet size. This GAST-branded component is identified by manufacturer part number AJ151D and cross-references 33K815 and R4310A-2.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the GAST Inlet Vacuum Filter AJ151D used for?
The GAST Inlet Vacuum Filter AJ151D is used to filter incoming air for regenerative blowers, protecting the blower from debris and contaminants. It is commonly applied in industrial vacuum systems, pneumatic conveying, and aeration processes where clean air intake is critical for equipment longevity and performance.
What are the specifications of the GAST Inlet Vacuum Filter AJ151D?
The GAST Inlet Vacuum Filter AJ151D has a 7 3/8 in outside diameter, a screw-on connection, and a 1 1/2 in FPT inlet size. It is a GAST-branded inlet filter with cover for regenerative blowers, cross-referenced as 33K815 and R4310A-2. The manufacturer part number is AJ151D.
Where to buy the GAST Inlet Vacuum Filter AJ151D worldwide?
You can source the GAST Inlet Vacuum Filter AJ151D through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we provide this GAST filter to customers across multiple industries.
How to install the GAST Inlet Vacuum Filter AJ151D?
To install the GAST Inlet Vacuum Filter AJ151D, first ensure the blower is off and depressurized. Screw the filter onto the inlet port using the 1 1/2 in FPT connection, tightening by hand until snug. Avoid over-tightening. Verify the filter is securely mounted and check for leaks before restarting the blower.
Digunakan dalam
Aplikasi umum untuk GASTGAST Produk
3G Electric memasok GAST inlet filters with covers for regenerative blowers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.













