GE LAMPS U-Shaped LED Bulb: T8, Medium Bi-Pin (G13), 6 in U-Bend Leg Spacing
The GE LAMPS U-Shaped LED Bulb: T8 (MPN LED13BDT8/U6/840) is an LED ballast-bypass (UL Type B) U-bend lamp with a medium bi-pin (G13) base and 6-inch U-bend leg spacing. It operates at 13 watts and delivers a color…
SKU 3G-OTH-386293
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GE LAMPS U-Shaped LED Bulb: T8 (MPN LED13BDT8/U6/840) is an LED ballast-bypass (UL Type B) U-bend lamp with a medium bi-pin (G13) base and 6-inch U-bend leg spacing. It operates at 13 watts and delivers a color temperature of 4000K. This bulb is not shatter-resistant.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the GE LAMPS U-Shaped LED Bulb T8 used for?
The GE LAMPS U-Shaped LED Bulb T8 (LED13BDT8/U6/840) is used for direct-wire replacement in troffer fixtures with 6-inch U-bend leg spacing. It suits commercial and industrial lighting applications such as offices, warehouses, and retail spaces where energy-efficient 4000K illumination is needed.
What are the specifications of the GE LAMPS LED13BDT8/U6/840?
The GE LAMPS LED13BDT8/U6/840 is a 13 W LED ballast-bypass (UL Type B) U-bend lamp with a medium bi-pin (G13) base, 6-inch U-bend leg spacing, and 4000K color temperature. It is not shatter-resistant and is designed for T8 linear fluorescent retrofit applications.
Where to buy GE LAMPS U-Shaped LED Bulb worldwide?
3G Electric supplies the GE LAMPS U-Shaped LED Bulb (LED13BDT8/U6/840) worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this 13 W, 4000K T8 U-bend lamp.
How to install a GE LAMPS UL Type B U-bend LED bulb?
Installation requires bypassing the existing fluorescent ballast and wiring line voltage directly to the lamp holders. Ensure power is off, remove the old lamp, rewire per the GE LAMPS instructions, and insert the LED13BDT8/U6/840 into the G13 sockets. Always follow local electrical codes.
Digunakan dalam
Aplikasi umum untuk GE LAMPSGE LAMPS Produk
3G Electric memasok GE LAMPS led ballast-bypass (ul type b) u-bend lamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.














