Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
GLEASON FRT-04 Festoon Cable Carrier Trolley for Wire Rope - Trolleys for Festoon Systems
GLEASONTrolleys for Festoon Systems

GLEASON FRT-04 Festoon Cable Carrier Trolley for Wire Rope

Troli pembawa kabel festoon GLEASON tipe FRT-04 adalah komponen peralatan industri yang dirancang untuk sistem festoon pada kabel tipe bulat (round) dengan diameter 0,31 in – 0,59 in. Terbuat dari material Nylon…

SKU 3G-OTH-331326

Juga terdaftar sebagai: FRT04 · FRT 04

Merek
GLEASON
Item
FRT-04 Festoon Cable Carrier Trolley for Wire Rope
Part Number
FRT-04
Kategori
Trolleys for Festoon Systems
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

GLEASON
Manufacturer Part Number
FRT-04
Type
Round, 0.31 in – 0.59 in
Overall Lg
2.75 in
UNSPSC
24101706
Includes
Hardware
Mfr. Model
FRT-04
Overall Width
1.1
Overall Height
2.7
Maximum Compatible Round Cable Diameter
0.59
Minimum Compatible Round Cable Diameter
0.31

Konten Lembar Data

P/N 63005604.b Printed in USA Workplace Solutions Phone: 920-387-4120 • TROLLEY INSTALLATION • Mayville, WI 53050 HUBBELL 600 South Clark St. ® thru 3/8"(9mm) O.D. SLIDE/SNAP For use on Wire Rope TOGETHER from 3/16"(5mm) Trolleys fit wire rope up to and including 0.375"(9mm) O.D. For Hose or Round Cable from 0.3 to 0.6" OD To install trolley – Place top section in position on wire rope. Slide sections together until they snap (lock) in place. NOTE: Sections may be assembled in only one way. Slide “un-blocked” end into “un-blocked” end. Do not force. Pry gently. PRY GENTLY, Do not turn SLIDE APART screwdriver. Festoon Trolley FRT-04 Model # To remove – Insert straight bladed screw driver into slot beside cable opening (not slit on side of trolley) and pry gently as shown above. Do not turn screwdriver. Slide Apart Contents: One model # FRT-04 Trolley for round cable or hose from 0.3 to 0.6" OD Use multiple trolleys for long festoon runs. Provide low cost, user friendly festoon systems. 8 MODELS AVAILABLE Festoon for hose or round cable. Festoon for flat cable. #WRS-01 #WRS-02 #FRT-24 #FRT-05 #FRT-25 #FRT-06 #FFT-08 TYPICAL Trolley Trolley with Trolley for Trolley for Trolley for Trolley for Trolley for flat with tool tool hook two round round cable two round round cable cable to APPLICATIONS hook and hose cables or or hose, 0.6" cables or or hose, 2.1" wide. connector hoses, 0.3" to 0.94" OD. hoses, 0.6" 0.95" to to 0.6" OD. to 0.94" OD. 1.25" OD. Products to make your workplace more efficient and safe. Ask for FREE CATALOG.
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

GLEASON Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Troli pembawa kabel festoon GLEASON tipe FRT-04 adalah komponen peralatan industri yang dirancang untuk sistem festoon pada kabel tipe bulat (round) dengan diameter 0,31 in – 0,59 in. Terbuat dari material Nylon dengan rangka troli dan roda dari Nylon, produk ini kompatibel dengan rel tipe wire rope dan sudah termasuk perlengkapan hardware. Dengan panjang keseluruhan 2,75 in, troli ini merupakan solusi andal untuk aplikasi pembakar industri dan sistem kelistrikan bergerak.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa GLEASON Festoon Cable Carrier Trolley FRT-04 digunakan?

Troli ini digunakan sebagai komponen sistem festoon untuk membawa kabel listrik atau kabel kontrol tipe bulat pada rel kawat (wire rope). Cocok untuk aplikasi peralatan pembakaran industri, ketel uap, dan sistem kelistrikan bergerak di pabrik.

Apa spesifikasi GLEASON Festoon Cable Carrier Trolley FRT-04?

Spesifikasi: Tipe Round, diameter kabel 0,31 in – 0,59 in, material Nylon, panjang keseluruhan 2,75 in, kompatibel dengan rel wire rope, rangka troli dan roda dari Nylon, termasuk hardware. Brand: GLEASON, part number FRT-04.

Di mana beli GLEASON Festoon Cable Carrier Trolley FRT-04 di Indonesia?

Anda dapat membeli GLEASON Festoon Cable Carrier Trolley FRT-04 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan kepabeanan untuk memastikan pengiriman sampai ke lokasi Anda.

Bagaimana cara memilih troli festoon yang tepat untuk sistem kabel saya?

Pilih troli berdasarkan tipe kabel (bulat), diameter kabel (0,31 in – 0,59 in), dan jenis rel (wire rope). GLEASON FRT-04 dengan material Nylon cocok untuk lingkungan industri ringan hingga sedang. Pastikan panjang troli (2,75 in) sesuai dengan ruang instalasi Anda.

Digunakan dalam

Aplikasi umum untuk GLEASON
Overhead crane power supply — GLEASON wire rope festoon kits (e.g., FR04-09) for round cable management on crane bridges.
Material handling systems — GLEASON C-rail festoon kits (e.g., RCG28006) for guiding cables on automated guided vehicles.
Hoist cable management — GLEASON festoon tow arms (e.g., F-CTA-F12) for attaching cables to moving hoist assemblies.
Warehouse conveyor systems — GLEASON festoon tracks (e.g., C35-TR-10) for supporting cable trolleys on straight runs.
Port equipment cable routing — GLEASON wire rope festoon kits (e.g., FR05-07) for managing hoses on ship-to-shore cranes.
Industrial robot cable guidance — GLEASON flat cable festoon kits (e.g., FF08-07) for flexible cable paths on gantry robots.
Not sure this is the right part? Photo-identify it→

GLEASON Produk

3G Electric memasok GLEASON trolleys for festoon systems. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Push trolley for hoists with cast aluminum frame. Designed for flat beam shapes with flange width 3 7/8 in – 7 7/8 in. Max hoist load capacity 12,400 lb. Used for manual movement of hoists along overhead beams in material handling applications
DEMAG
Push trolley for hoists with cast aluminum frame. Designed for flat beam shapes with flange width 3 7/8 in – 7 7/8 in. Max hoist load capacity 12,400 lb. Used for manual movement of hoists along overhead beams in material handling applications
Push trolley for hoists with cast aluminum frame. Designed for flat beams with flange width 7 7/8 in to 12 3/16 in. Max hoist load capacity 12,400 lb. Used to suspend a hoist from an overhead beam and manually move loads along the beam
DEMAG
Push trolley for hoists with cast aluminum frame. Designed for flat beams with flange width 7 7/8 in to 12 3/16 in. Max hoist load capacity 12,400 lb. Used to suspend a hoist from an overhead beam and manually move loads along the beam
This push trolley is designed for mounting a hoist on a flat beam and manually moving loads along the beam. It accommodates beam flange widths from 2 7/8 in to 7 7/8 in and has a maximum hoist load capacity of 4,800 lb. The trolley frame is made of cast aluminum
DEMAG
This push trolley is designed for mounting a hoist on a flat beam and manually moving loads along the beam. It accommodates beam flange widths from 2 7/8 in to 7 7/8 in and has a maximum hoist load capacity of 4,800 lb. The trolley frame is made of cast aluminum
Push trolley for mounting a hoist on a flat beam, allowing manual movement along the beam. Cast aluminum frame. Fits beam flange widths from 2 in to 3 1/2 in. Maximum hoist load capacity: 1,200 lb
DEMAG
Push trolley for mounting a hoist on a flat beam, allowing manual movement along the beam. Cast aluminum frame. Fits beam flange widths from 2 in to 3 1/2 in. Maximum hoist load capacity: 1,200 lb
Push trolley for mounting a hoist on a flat beam. Cast aluminum frame supports up to 2,400 lb. Adjustable for beam flange widths from 2 1/4 in to 7 7/8 in. Used for manual overhead load positioning in industrial settings
DEMAG
Push trolley for mounting a hoist on a flat beam. Cast aluminum frame supports up to 2,400 lb. Adjustable for beam flange widths from 2 1/4 in to 7 7/8 in. Used for manual overhead load positioning in industrial settings
Cast aluminum push trolley for mounting a hoist on a flat beam. Supports a maximum hoist load capacity of 2,400 lb and fits beam flange widths from 7 7/8 in to 12 3/16 in. Used for manual movement of loads along overhead beams in material handling applications
DEMAG
Cast aluminum push trolley for mounting a hoist on a flat beam. Supports a maximum hoist load capacity of 2,400 lb and fits beam flange widths from 7 7/8 in to 12 3/16 in. Used for manual movement of loads along overhead beams in material handling applications

Lainnya dari GLEASON

Lihat semua GLEASON suku cadang →
Steel trolley for festoon systems, designed for use with C-Rail track and round cable. Features steel trolley wheels and a 5-inch overall length. Used to support and guide cable in material handling applications such as cranes and hoists
GLEASON
Steel trolley for festoon systems, designed for use with C-Rail track and round cable. Features steel trolley wheels and a 5-inch overall length. Used to support and guide cable in material handling applications such as cranes and hoists
Steel trolley for festoon systems, compatible with C-Rail track and round cable. Accommodates cable diameters from 0.6 in to 0.94 in. Overall length 5 in. Steel trolley wheels. Used in overhead cable management for moving equipment
GLEASON
Steel trolley for festoon systems, compatible with C-Rail track and round cable. Accommodates cable diameters from 0.6 in to 0.94 in. Overall length 5 in. Steel trolley wheels. Used in overhead cable management for moving equipment
Steel trolley for festoon systems, designed for flat cable and I-beam track. Includes four steel ball bearing wheels. Compatible with I-beam size S6 x 12.5 and flange width 0.94 in to 1.25 in. Overall length 5.5 in
GLEASON
Steel trolley for festoon systems, designed for flat cable and I-beam track. Includes four steel ball bearing wheels. Compatible with I-beam size S6 x 12.5 and flange width 0.94 in to 1.25 in. Overall length 5.5 in
Steel intermediate trolley for festoon systems, compatible with C-Rail track and round cable. Steel wheels. Overall length 3 inches. Used for cable management in crane electrification, hoist power supply, and moving machinery
GLEASON
Steel intermediate trolley for festoon systems, compatible with C-Rail track and round cable. Steel wheels. Overall length 3 inches. Used for cable management in crane electrification, hoist power supply, and moving machinery
Steel intermediate trolley for festoon systems on C-Rail track. Accommodates round cable diameters from 0.6 in to 0.94 in. Features steel trolley wheels and an overall length of 3.97 in. Used to support and guide cables in material handling and crane runway applications
GLEASON
Steel intermediate trolley for festoon systems on C-Rail track. Accommodates round cable diameters from 0.6 in to 0.94 in. Features steel trolley wheels and an overall length of 3.97 in. Used to support and guide cables in material handling and crane runway applications
Nylon trolley for festoon systems on wire rope tracks. Accommodates round cables 0.6 in to 0.94 in diameter. Overall length 3.86 in. Nylon wheels and body
GLEASON
Nylon trolley for festoon systems on wire rope tracks. Accommodates round cables 0.6 in to 0.94 in diameter. Overall length 3.86 in. Nylon wheels and body
This steel intermediate trolley supports flat festoon cables on I-beam tracks in overhead material handling systems. It includes four steel ball bearing wheels and fits I-beam size S6 x 12.5 with an overall length of 5.5 in. The flat type accommodates beam flanges from 1.25 in to 3.5 in
GLEASON
This steel intermediate trolley supports flat festoon cables on I-beam tracks in overhead material handling systems. It includes four steel ball bearing wheels and fits I-beam size S6 x 12.5 with an overall length of 5.5 in. The flat type accommodates beam flanges from 1.25 in to 3.5 in
Steel intermediate trolley designed for festoon systems on C-Rail tracks. Accommodates round cables with a diameter range of 0.95 in to 1.25 in. Features steel wheels and an overall length of 5.79 in. Used to support and guide cables in industrial crane and hoist applications
GLEASON
Steel intermediate trolley designed for festoon systems on C-Rail tracks. Accommodates round cables with a diameter range of 0.95 in to 1.25 in. Features steel wheels and an overall length of 5.79 in. Used to support and guide cables in industrial crane and hoist applications