GROTE Switch to Starter Cable: Switch to Start Cable, 1 ga Wire Size, 25 in Overall Lg
The GROTE Switch to Start Cable (MPN 84-9263) is a black, 60VDC-rated cable with a 1 ga wire size and 25-inch overall length. It features bolt-type connections and is designed for switch-to-starter termination. 3G…
SKU 3G-OTH-485930
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GROTE Switch to Start Cable (MPN 84-9263) is a black, 60VDC-rated cable with a 1 ga wire size and 25-inch overall length. It features bolt-type connections and is designed for switch-to-starter termination. 3G Electric interprets your demand for this genuine GROTE part, sourcing it across our 14 industrial departments with specialist depth in electrical components.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the GROTE Switch to Start Cable used for?
The GROTE Switch to Start Cable (MPN 84-9263) connects a vehicle's ignition switch to the starter solenoid, enabling engine cranking. It is commonly used in heavy-duty trucks, buses, and off-road equipment where a reliable 60VDC-rated, 1 ga cable with bolt connections is required.
What are the specifications of the GROTE 84-9263 cable?
The GROTE 84-9263 is a black, 60VDC-rated switch-to-start cable with a 1 ga wire size and 25-inch overall length. It features bolt-type connections and a switch-to-start termination type. This GROTE part is designed for heavy-duty electrical systems in commercial vehicles.
Where to buy GROTE switch to start cables worldwide?
3G Electric supplies the genuine GROTE 84-9263 switch to start cable to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source this part across our 14 departments, including specialist electrical expertise.
How to install a GROTE switch to start cable?
To install the GROTE 84-9263, disconnect the battery, then connect the bolt terminals to the ignition switch and starter solenoid. Ensure the 1 ga cable is routed away from heat sources and sharp edges. Tighten connections to manufacturer torque specs and verify with a multimeter before reconnecting power.
Digunakan dalam
Aplikasi umum untuk GROTEGROTE Produk
3G Electric memasok GROTE switch to start cables. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
