GRUVLOK Clamp Coupling: Clamp Tee, 2 in x 2 in x 1/2 in, EPDM Seal, 500 psi, Ductile Iron
The GRUVLOK Clamp Coupling: Clamp Tee is a threaded outlet pipe clamp with a 2 in x 2 in x 1/2 in configuration, featuring an EPDM seal and a bolted ductile iron design rated for a maximum operating pressure of 500…
SKU 3G-OTH-459224
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GRUVLOK Clamp Coupling: Clamp Tee is a threaded outlet pipe clamp with a 2 in x 2 in x 1/2 in configuration, featuring an EPDM seal and a bolted ductile iron design rated for a maximum operating pressure of 500 psi. This product is supplied by 3G Electric, a global industrial solutions provider that interprets customer demand and delivers genuine equipment across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a GRUVLOK Clamp Tee used for?
A GRUVLOK Clamp Tee connects branch piping in grooved-end fire protection, HVAC, and industrial systems. Its 2 in x 2 in x 1/2 in threaded outlet allows easy takeoff for smaller lines, sensors, or drains. The EPDM seal handles water and mild chemicals up to 500 psi.
What are the specifications of the GRUVLOK 0390175008?
The GRUVLOK 0390175008 is a bolted ductile iron clamp tee with a 2 in x 2 in x 1/2 in configuration, EPDM seal, and maximum operating pressure of 500 psi. It is designed for grooved-end piping systems and supplied by 3G Electric.
Where to buy GRUVLOK clamp couplings worldwide?
3G Electric supplies GRUVLOK clamp couplings worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source genuine GRUVLOK parts like the 0390175008 clamp tee and deliver to any international destination.
How to install a GRUVLOK clamp tee?
To install a GRUVLOK clamp tee, ensure pipe ends are clean and grooved per manufacturer specs. Lubricate the EPDM gasket, place it over the pipe ends, and position the ductile iron housing. Tighten bolts evenly to the recommended torque for a leak-free joint rated to 500 psi.
Digunakan dalam
Aplikasi umum untuk GRUVLOKGRUVLOK Produk
3G Electric memasok GRUVLOK threaded outlet pipe clamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









