GRUVLOK Clamp Coupling: Bolted Clamp Tee, 4 in x 4 in x 1 1/2 in, Ductile Iron
The GRUVLOK Bolted Clamp Tee is a 4 in x 4 in x 1-1/2 in outlet pipe clamp coupling made of ductile iron with an NBR seal, rated for a maximum operating pressure of 500 psi (MPN 0390172237). 3G Electric sources this…
SKU 3G-OTH-466165
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GRUVLOK Bolted Clamp Tee is a 4 in x 4 in x 1-1/2 in outlet pipe clamp coupling made of ductile iron with an NBR seal, rated for a maximum operating pressure of 500 psi (MPN 0390172237). 3G Electric sources this genuine GRUVLOK fitting across 14 industrial departments — and we supply far more than is listed — with specialist depth in combustion, pumps and controls as an authorised distributor for brands including FBR, Interpump, Riello, Beckett, Schneider, ABB, Siemens, SKF, Festo and Fluke.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a GRUVLOK bolted clamp tee used for?
A GRUVLOK bolted clamp tee creates a branch connection in grooved-end piping systems. It is used in fire protection, HVAC, and industrial water lines to divert flow from a 4-inch main to a 1-1/2-inch outlet, rated for up to 500 psi.
What are the specifications of the GRUVLOK 0390172237 clamp tee?
The GRUVLOK 0390172237 is a 4 in x 4 in x 1-1/2 in bolted clamp tee made of ductile iron with an NBR seal. It has a maximum operating pressure of 500 psi and is designed for grooved-end pipe connections.
Where to buy a GRUVLOK 4-inch clamp tee worldwide?
3G Electric supplies the genuine GRUVLOK 0390172237 bolted clamp tee worldwide. We handle full logistics and customs clearance to deliver this ductile-iron fitting to your site, backed by our sourcing across 14 industrial departments.
How to install a GRUVLOK bolted clamp tee?
To install a GRUVLOK bolted clamp tee, ensure pipe ends are clean and grooved per GRUVLOK standards. Lubricate the NBR gasket, place it over the pipe ends, and tighten the bolts evenly to the torque specified by the manufacturer for a leak-free joint.
Digunakan dalam
Aplikasi umum untuk GRUVLOKGRUVLOK Produk
3G Electric memasok GRUVLOK outlet pipe clamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.








