GRUVLOK Clamp Coupling: Flex Bolted, 1 1/2 in x 1 1/2 in, Ductile Iron, NBR Seal
The GRUVLOK Clamp Coupling: Flex Bolted is a grooved pipe coupling in a 1-1/2 in x 1-1/2 in size, constructed from ductile iron with an NBR seal and rated for a maximum operating pressure of 600 psi (MPN 0390000784)…
SKU 3G-OTH-468168
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GRUVLOK Clamp Coupling: Flex Bolted is a grooved pipe coupling in a 1-1/2 in x 1-1/2 in size, constructed from ductile iron with an NBR seal and rated for a maximum operating pressure of 600 psi (MPN 0390000784). 3G Electric interprets this demand and delivers this genuine industrial coupling across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the GRUVLOK Flex Bolted Clamp Coupling used for?
The GRUVLOK Flex Bolted Clamp Coupling connects grooved-end pipes in fire protection, HVAC, and industrial piping systems. It provides a flexible, leak-tight joint rated for 600 psi, accommodating minor misalignment and thermal expansion in ductile iron or steel pipe runs.
What are the specifications of the GRUVLOK 0390000784 coupling?
This GRUVLOK coupling has a 1-1/2 in x 1-1/2 in fitting pipe size, ductile iron construction, NBR seal, and a maximum operating pressure of 600 psi. The manufacturer part number is 0390000784. It is a flex bolted style for grooved pipe systems.
Where to buy GRUVLOK couplings in worldwide?
3G Electric supplies genuine GRUVLOK couplings worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source this coupling and support your project with specialist expertise across 14 departments.
How to install a GRUVLOK flex bolted coupling?
Ensure pipe ends are clean and grooved per GRUVLOK specifications. Lubricate the NBR gasket and place it over one pipe end. Slide the coupling housing over the gasket, insert bolts, and tighten evenly to the recommended torque. Do not exceed 600 psi operating pressure.
Digunakan dalam
Aplikasi umum untuk GRUVLOKGRUVLOK Produk
3G Electric memasok GRUVLOK grooved pipe couplings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.







