GRUVLOK 45° Lateral: Wye, 6 in x 6 in x 6 in, Carbon Steel, EPDM Seal
The GRUVLOK 45° Lateral: Wye is a grooved pipe fitting in carbon steel with an EPDM seal, sized 6 in x 6 in x 6 in and rated for 300 psi @ 150°F (MPN 0390024842). 3G Electric interprets this demand and delivers it…
SKU 3G-OTH-460959
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The GRUVLOK 45° Lateral: Wye is a grooved pipe fitting in carbon steel with an EPDM seal, sized 6 in x 6 in x 6 in and rated for 300 psi @ 150°F (MPN 0390024842). 3G Electric interprets this demand and delivers it across 14 industrial departments — with specialist depth in combustion, pumps and controls as an authorised distributor — ensuring you get the right answer, not just a catalog.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a GRUVLOK 45° Lateral Wye used for?
A GRUVLOK 45° Lateral Wye is a grooved pipe fitting used in fire protection, HVAC, and industrial piping systems to create a 45-degree branch connection. It allows flow diversion or merging in carbon steel piping, rated for 300 psi at 150°F, with an EPDM seal for water and mild chemical service.
What are the specifications of the GRUVLOK 45° Lateral Wye 6 in x 6 in x 6 in?
The GRUVLOK 45° Lateral Wye (MPN 0390024842) is a 6 in x 6 in x 6 in grooved pipe fitting made of carbon steel with an EPDM seal. It has a maximum operating pressure of 300 psi at 150°F. This fitting is designed for use with grooved-end pipes in commercial and industrial applications.
Where to buy a GRUVLOK 45° Lateral Wye worldwide?
3G Electric supplies the GRUVLOK 45° Lateral Wye worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order this carbon steel fitting with EPDM seal, rated 300 psi at 150°F, for your piping project.
How to install a GRUVLOK grooved pipe fitting?
To install a GRUVLOK grooved pipe fitting, ensure pipe ends are clean and properly grooved per manufacturer specifications. Lubricate the EPDM gasket, place it over the pipe end, and slide the fitting into position. Tighten bolts evenly to the recommended torque. Always follow GRUVLOK's installation instructions for pressure ratings.
Digunakan dalam
Aplikasi umum untuk GRUVLOKGRUVLOK Produk
3G Electric memasok GRUVLOK grooved pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
