Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
HACH Water Quality Multiparameter (MPN 8507570) - Benchtop Multiparameter Meters
HACHBenchtop Multiparameter Meters

HACH Water Quality Multiparameter (MPN 8507570)

HACH Water Quality Multiparameter adalah alat ukur benchtop multiparameter yang dirancang untuk pengujian kualitas air secara presisi. Produk ini dilengkapi dengan parameter uji Ammonia, serta mencakup PHC201…

SKU 3G-OTH-374331

Merek
HACH
Item
Water Quality Multiparameter
Part Number
8507570
Kategori
Benchtop Multiparameter Meters
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Compliance & shipping

Hazardous material
Not classified as hazardous
California Prop 65 warning
No warning recorded
Licence required
No licence required
Safety Data Sheet
Not available
Special shipping
Ships under standard freight

Spesifikasi Teknis

HACH
Manufacturer Part Number
8507570
ORP - Max
1,500
ORP - Min
-1,500
TDS Range
0 mg/L to 50
Mfr. Model
8507570
Overall Depth
9-1/4
Overall Width
6-5/8
ORP Resolution
0.1
Overall Height
3-3/8
Salinity - Max
42
Salinity Range
0 ppt to 42
TDS Resolution
0.01
Conductivity Range
0.01 uS/cm to 200
pH Range - Maximum
14
pH Range - Minimum
0
Salinity Resolution
0.01
pH Calibration Points
3
Conductivity Resolution
0.01
Conductivity Range - Max
200
Display Temperature - Maximum
110
Display Temperature - Minimum
-10
Oxygen Concentration - Maximum
20 mg/L (ppm);
Operating Temperature - Maximum
140
Operating Temperature - Minimum
32
Oxygen Concentration Resolution
0.1

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

HACH Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

HACH Water Quality Multiparameter adalah alat ukur benchtop multiparameter yang dirancang untuk pengujian kualitas air secara presisi. Produk ini dilengkapi dengan parameter uji Ammonia, serta mencakup PHC201 Combined pH Gel Electrode dengan kabel 1 m, Universal Electrode Stand with Electrode Holder, dan pH Buffer Kit 4,01/7,00/10,01 (500 mL). Dengan nomor bagian pabrikan 8507570, alat ini ideal untuk aplikasi laboratorium dan industri yang membutuhkan pemantauan kualitas air secara akurat.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi HACH Water Quality Multiparameter 8507570?

HACH Water Quality Multiparameter dengan nomor bagian 8507570 memiliki parameter uji Ammonia. Perlengkapan yang disertakan meliputi PHC201 Combined pH Gel Electrode dengan kabel 1 m, Universal Electrode Stand with Electrode Holder, dan pH Buffer Kit 4,01/7,00/10,01 (500 mL).

Untuk apa HACH Water Quality Multiparameter digunakan?

Alat ini digunakan untuk mengukur kualitas air secara multiparameter di laboratorium atau industri. Dengan parameter uji Ammonia, alat ini membantu memantau konsentrasi amonia dalam sampel air, yang penting untuk pengolahan air limbah, budidaya perikanan, dan kontrol proses industri.

Apa saja aksesori yang termasuk dalam HACH Water Quality Multiparameter 8507570?

Aksesori yang disertakan meliputi Universal Electrode Stand with Electrode Holder, PHC201 Combined pH Gel Electrode dengan kabel 1 m, dan pH Buffer Kit 4,01/7,00/10,01 (500 mL). Semua komponen ini memastikan alat siap digunakan untuk pengukuran pH dan amonia.

Di mana beli HACH Water Quality Multiparameter di Indonesia?

Anda dapat membeli HACH Water Quality Multiparameter melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima alat ini dengan mudah untuk kebutuhan pengujian kualitas air.

Digunakan dalam

Aplikasi umum untuk HACH
Municipal water treatment — HACH PHC20101 IntelliCAL pH electrode for pH monitoring in distribution systems
Industrial wastewater — HACH Chloride Test Kit (2438600) for chlorine residual analysis in effluent
Laboratory analysis — HACH Buffer Standard Solution S11M005 for calibrating pH meters in quality control labs
Environmental field testing — HACH Chemical Test Strips (2793828) for rapid water quality screening
Process water monitoring — HACH Probe LZW5056.97.0002 for ORP measurement in cooling towers
Wastewater treatment — HACH Water Quality Test Kit (2182000) for nitrite monitoring in biological treatment processes
Not sure this is the right part? Photo-identify it→

HACH Produk

3G Electric memasok HACH benchtop multiparameter meters. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This benchtop meter measures pH and includes an ISENH4181 Ammonium Ion Selective Electrode with 1 m cable for 10 mg/L and 100 mg/L measurements. It is supplied with a power supply adapter and Nitrogen Ammonia Standard 500 mL solutions at 1 mg/L. Suitable for laboratory water testing applications
HACH
This benchtop meter measures pH and includes an ISENH4181 Ammonium Ion Selective Electrode with 1 m cable for 10 mg/L and 100 mg/L measurements. It is supplied with a power supply adapter and Nitrogen Ammonia Standard 500 mL solutions at 1 mg/L. Suitable for laboratory water testing applications
Benchtop multiparameter meter for measuring temperature. Includes CDC401 Conductivity/TDS/Salinity Cell with 1 m cable, universal electrode stand with electrode holder, and NaCl conductivity standard (1000 µS/cm, 491 mg/L, 100 mL). Suitable for laboratory water quality testing
HACH
Benchtop multiparameter meter for measuring temperature. Includes CDC401 Conductivity/TDS/Salinity Cell with 1 m cable, universal electrode stand with electrode holder, and NaCl conductivity standard (1000 µS/cm, 491 mg/L, 100 mL). Suitable for laboratory water quality testing
Selective electrode for nitrate measurement in water samples. Includes 1 m cable, universal electrode stand with holder, and Nitrogen Ammonia Standard 500 mL solutions at 1 mg/L. Designed for use with benchtop multiparameter meters in laboratory water quality testing
HACH
Selective electrode for nitrate measurement in water samples. Includes 1 m cable, universal electrode stand with holder, and Nitrogen Ammonia Standard 500 mL solutions at 1 mg/L. Designed for use with benchtop multiparameter meters in laboratory water quality testing
This benchtop multiparameter meter is configured for BOD (Biochemical Oxygen Demand) measurement in water quality analysis. It includes a CDC401 Conductivity/TDS/Salinity Cell with 1 m cable, a power supply adapter, and NaCl conductivity standard (1000 µS/cm, 491 mg/L, 100 mL). Suitable for environmental laboratories and wastewater treatment facilities
HACH
This benchtop multiparameter meter is configured for BOD (Biochemical Oxygen Demand) measurement in water quality analysis. It includes a CDC401 Conductivity/TDS/Salinity Cell with 1 m cable, a power supply adapter, and NaCl conductivity standard (1000 µS/cm, 491 mg/L, 100 mL). Suitable for environmental laboratories and wastewater treatment facilities
This handheld multiparameter meter is designed for pH measurement in water quality analysis. It includes a carry case for transport and storage. Electrodes and reagents are not included and must be purchased separately
HACH
This handheld multiparameter meter is designed for pH measurement in water quality analysis. It includes a carry case for transport and storage. Electrodes and reagents are not included and must be purchased separately
Handheld multiparameter meter for temperature measurement. Includes PHC10101 Intellical pH electrode (pH 2-14, 0-50 °C, 1 m cable), two channels, and 20 single-use pH 10.01 buffer sachets. Suitable for field water testing in environmental, industrial, and treatment applications
HACH
Handheld multiparameter meter for temperature measurement. Includes PHC10101 Intellical pH electrode (pH 2-14, 0-50 °C, 1 m cable), two channels, and 20 single-use pH 10.01 buffer sachets. Suitable for field water testing in environmental, industrial, and treatment applications

Lainnya dari HACH

Lihat semua HACH suku cadang →
This benchtop multiparameter meter includes an ISECL181 chloride ion selective electrode with a 1 m cable and a temperature sensor. It comes with a universal electrode stand with electrode holder and 100 chloride ISAB powder pillows pack. Used for measuring chloride ion concentration in water samples
HACH
This benchtop multiparameter meter includes an ISECL181 chloride ion selective electrode with a 1 m cable and a temperature sensor. It comes with a universal electrode stand with electrode holder and 100 chloride ISAB powder pillows pack. Used for measuring chloride ion concentration in water samples
Benchtop multiparameter meter accessory for measuring chloride concentration in water samples. Includes ISENO3181 nitrate ion selective electrode with 1 m cable, (4) alkaline 1.5V AA batteries, and (100) nitrate ISAB powder pillows pack. Suitable for environmental and industrial water quality testing
HACH
Benchtop multiparameter meter accessory for measuring chloride concentration in water samples. Includes ISENO3181 nitrate ion selective electrode with 1 m cable, (4) alkaline 1.5V AA batteries, and (100) nitrate ISAB powder pillows pack. Suitable for environmental and industrial water quality testing
This benchtop multiparameter meter is configured for fluoride measurement in water quality analysis. It includes an ISEF121 Fluoride Ion Selective Electrode with 1 m cable, (4) alkaline 1.5V AA batteries, and fluoride standard solutions (500 mL) with (100) 0.5 mg/L, 1 mg/L, and 10 mg/L ISAB powder pillows pack. Suitable for laboratory use in water testing applications
HACH
This benchtop multiparameter meter is configured for fluoride measurement in water quality analysis. It includes an ISEF121 Fluoride Ion Selective Electrode with 1 m cable, (4) alkaline 1.5V AA batteries, and fluoride standard solutions (500 mL) with (100) 0.5 mg/L, 1 mg/L, and 10 mg/L ISAB powder pillows pack. Suitable for laboratory use in water testing applications
The HACH HQ430D is a benchtop multiparameter meter designed for BOD (Biochemical Oxygen Demand) measurement. It includes a universal power adapter; electrodes and reagents are sold separately. This meter is used in water quality analysis applications such as environmental testing and wastewater monitoring
HACH
The HACH HQ430D is a benchtop multiparameter meter designed for BOD (Biochemical Oxygen Demand) measurement. It includes a universal power adapter; electrodes and reagents are sold separately. This meter is used in water quality analysis applications such as environmental testing and wastewater monitoring
Benchtop multiparameter meter for conductivity measurement. Includes ISEF121 fluoride ion selective electrode with 1 m cable, power cord, and fluoride standard solutions (0.5, 1, 10 mg/L, 500 mL each). Used for water quality testing in laboratory and field applications
HACH
Benchtop multiparameter meter for conductivity measurement. Includes ISEF121 fluoride ion selective electrode with 1 m cable, power cord, and fluoride standard solutions (0.5, 1, 10 mg/L, 500 mL each). Used for water quality testing in laboratory and field applications
Benchtop multiparameter meter system for conductivity measurement. Includes ISENA381 ammonia ion selective electrode with 1 m cable, universal probe stand with electrode holder, and sodium standard solutions (10 mg/L, 100 mg/L in 500 mL bottles; 1000 mg/L in 1 L bottle). Used in water quality testing for environmental monitoring, wastewater treatment, and laboratory analysis
HACH
Benchtop multiparameter meter system for conductivity measurement. Includes ISENA381 ammonia ion selective electrode with 1 m cable, universal probe stand with electrode holder, and sodium standard solutions (10 mg/L, 100 mg/L in 500 mL bottles; 1000 mg/L in 1 L bottle). Used in water quality testing for environmental monitoring, wastewater treatment, and laboratory analysis
The HACH HQ411D is a benchtop multiparameter meter that measures temperature. It includes (4) AA batteries; electrodes and reagents are sold separately. This meter is used in laboratory and industrial settings for water quality testing where temperature measurement is required
HACH
The HACH HQ411D is a benchtop multiparameter meter that measures temperature. It includes (4) AA batteries; electrodes and reagents are sold separately. This meter is used in laboratory and industrial settings for water quality testing where temperature measurement is required
The HACH CDC401 is a conductivity, total dissolved solids (TDS), and salinity measurement cell with a 1 m cable, designed for benchtop multiparameter testing of chloride. It includes a power supply adapter and a NaCl conductivity standard (1000 µS/cm, 491 mg/L, 100 mL). This cell is used in water quality analysis, environmental monitoring, and industrial process control
HACH
The HACH CDC401 is a conductivity, total dissolved solids (TDS), and salinity measurement cell with a 1 m cable, designed for benchtop multiparameter testing of chloride. It includes a power supply adapter and a NaCl conductivity standard (1000 µS/cm, 491 mg/L, 100 mL). This cell is used in water quality analysis, environmental monitoring, and industrial process control