HACH ZoBell's ORP/Redox Standard Solution: 500 mL Volume, 13746-66-2, Solution
The HACH ZoBell's ORP/Redox Standard Solution is a 500 mL volume calibration solution used for ORP/redox sensor verification. This solution has a CAS number of 13746-66-2 and is classified under the chemical family…
SKU 3G-OTH-376324
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The HACH ZoBell's ORP/Redox Standard Solution is a 500 mL volume calibration solution used for ORP/redox sensor verification. This solution has a CAS number of 13746-66-2 and is classified under the chemical family type of Solution, with manufacturer part number 2316949.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is HACH ZoBell's ORP/Redox Standard Solution used for?
HACH ZoBell's ORP/Redox Standard Solution is used to verify and calibrate ORP (oxidation-reduction potential) and redox sensors in water quality monitoring. It ensures accurate measurement of chemical disinfection, industrial process water, and wastewater treatment systems.
What are the specifications of HACH ZoBell's ORP/Redox Standard Solution?
This HACH ZoBell's ORP/Redox Standard Solution has a 500 mL volume, CAS number 13746-66-2, and manufacturer part number 2316949. It is a liquid solution classified under the chemical family type Solution, designed for ORP/redox sensor calibration.
Where to buy HACH ZoBell's ORP/Redox Standard Solution worldwide?
You can source HACH ZoBell's ORP/Redox Standard Solution worldwide through 3G Electric. As a global industrial equipment distributor, 3G Electric handles full logistics, customs clearance, and delivery to your location, ensuring compliance with international shipping requirements.
How to use HACH ZoBell's ORP/Redox Standard Solution for calibration?
To calibrate an ORP sensor, pour a fresh aliquot of HACH ZoBell's ORP/Redox Standard Solution into a clean beaker. Immerse the sensor, allow it to stabilize, then adjust the meter reading to the solution's known ORP value. Discard used solution after single use to avoid contamination.
Digunakan dalam
Aplikasi umum untuk HACHHACH Produk
3G Electric memasok HACH additional calibration solutions & standards. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
