HAM-LET Compression Fitting Elbow: 1/2 in OD x 1/4 in Pipe Fitting Size
The HAM-LET Compression Fitting Elbow is a double-ferrule stainless steel fitting with a 1/2 in OD x 1/4 in pipe fitting size, Compression x MNPT type (MPN 769L SS 1/2 X 1/4). It is compatible with Swagelok fitting…
SKU 3G-OTH-471954
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The HAM-LET Compression Fitting Elbow is a double-ferrule stainless steel fitting with a 1/2 in OD x 1/4 in pipe fitting size, Compression x MNPT type (MPN 769L SS 1/2 X 1/4). It is compatible with Swagelok fitting brands.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a HAM-LET compression fitting elbow used for?
A HAM-LET compression fitting elbow connects tubing to a male NPT port at a 90-degree angle. It is used in instrumentation, hydraulic, and process systems where a leak-tight, vibration-resistant seal is required. The double-ferrule design ensures reliable metal-to-metal grip on the tubing.
What are the specifications of the HAM-LET 769L SS 1/2 X 1/4 elbow?
This HAM-LET double-ferrule stainless steel elbow has a compression end for 1/2 in OD tubing and a 1/4 in male NPT pipe thread. The MPN is 769L SS 1/2 X 1/4. It is compatible with Swagelok fitting brands and is made from 316 stainless steel for corrosion resistance.
Where to buy HAM-LET compression fittings for worldwide delivery?
3G Electric supplies HAM-LET compression fittings, including the 769L SS 1/2 X 1/4 elbow, to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this double-ferrule stainless steel fitting.
How to install a HAM-LET double-ferrule compression fitting?
Insert the tubing fully into the fitting until it bottoms against the shoulder. Tighten the nut finger-tight, then use a wrench to turn the nut 1-1/4 turns past finger-tight for 1/2 in OD tubing. This creates a proper bite from the front and back ferrule for a leak-free seal. Do not over-tighten.
Digunakan dalam
Aplikasi umum untuk HAM-LETHAM-LET Produk
3G Electric memasok HAM-LET double-ferrule stainless steel fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
