HAM-LET Compression Fitting Union: 18 mm OD x 3/4 in OD Fitting Size
The HAM-LET Compression Fitting Union is a double-ferrule stainless steel fitting with a compression x compression configuration, sized 18 mm OD x 3/4 in OD. It is compatible with Swagelok fitting brands and is…
SKU 3G-OTH-471248
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The HAM-LET Compression Fitting Union is a double-ferrule stainless steel fitting with a compression x compression configuration, sized 18 mm OD x 3/4 in OD. It is compatible with Swagelok fitting brands and is identified by manufacturer part number 763L SS 18MMX 3/4.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a HAM-LET compression fitting union used for?
A HAM-LET compression fitting union connects two tubes of different sizes — 18 mm OD and 3/4 in OD — in a leak-tight, double-ferrule stainless steel design. It is commonly used in instrumentation, hydraulic, and process systems where reliable, vibration-resistant joints are required.
What are the specifications of the HAM-LET 763L SS 18MMX 3/4?
This HAM-LET double-ferrule stainless steel union has a compression x compression configuration with fitting sizes 18 mm OD and 3/4 in OD. It is compatible with Swagelok fitting brands and carries manufacturer part number 763L SS 18MMX 3/4.
Where to buy HAM-LET compression fittings worldwide?
3G Electric supplies HAM-LET compression fittings like the 763L SS 18MMX 3/4 to customers worldwide. We handle full logistics, customs clearance, and delivery, ensuring you receive genuine industrial components for your instrumentation or process systems.
How to install a HAM-LET double-ferrule compression fitting?
Insert the tube fully into the fitting, hand-tighten the nut, then use a wrench to tighten 1-1/4 turns past hand-tight for 18 mm OD tubing. For 3/4 in OD, follow the same procedure. Always use a gap gauge to verify proper ferrule bite and avoid over-tightening.
Digunakan dalam
Aplikasi umum untuk HAM-LETHAM-LET Produk
3G Electric memasok HAM-LET double-ferrule stainless steel fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
