HAM-LET Compression Fitting Adapter: 5/8 in OD x 5/8 in OD Fitting Size
The HAM-LET Compression Fitting Adapter is a double-ferrule stainless steel fitting in a tube x tube configuration, sized 5/8 in OD x 5/8 in OD. Part of the Let-Lok series (MPN 762L SS 5/8), it is compatible with…
SKU 3G-OTH-471480
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The HAM-LET Compression Fitting Adapter is a double-ferrule stainless steel fitting in a tube x tube configuration, sized 5/8 in OD x 5/8 in OD. Part of the Let-Lok series (MPN 762L SS 5/8), it is compatible with Swagelok fittings. 3G Electric interprets demand and delivers this genuine industrial component across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a HAM-LET compression fitting adapter used for?
A HAM-LET compression fitting adapter connects two tubes of the same outer diameter in instrumentation and process systems. This double-ferrule stainless steel design provides a leak-tight seal in high-pressure fluid or gas lines across industries like chemical, oil and gas, and power generation.
What are the specifications of the HAM-LET 762L SS 5/8?
The HAM-LET 762L SS 5/8 is a Let-Lok series double-ferrule stainless steel fitting adapter. It has a tube x tube configuration with 5/8 in OD on both ends. It is compatible with Swagelok fittings and carries the manufacturer part number 762L SS 5/8.
Where to buy HAM-LET compression fittings in worldwide?
3G Electric supplies genuine HAM-LET compression fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the 762L SS 5/8 or other Let-Lok series components for your application.
How to install a HAM-LET double-ferrule compression fitting?
Installation follows standard double-ferrule practice: slide the nut and ferrules onto the tube, insert the tube fully into the fitting body, then tighten the nut to the manufacturer’s recommended torque. Over-tightening can damage the ferrules. Always verify with a gap gauge per HAM-LET instructions.
Digunakan dalam
Aplikasi umum untuk HAM-LETHAM-LET Produk
3G Electric memasok HAM-LET double-ferrule stainless steel fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
