HAM-LET Compression Fitting Adapter: 1/8 in OD x 1/8 in OD Fitting Size
The HAM-LET Compression Fitting Adapter is a double-ferrule stainless steel fitting in a tube x tube configuration, with 1/8 in OD x 1/8 in OD fitting size. Part of the Let-Lok series (MPN 767LT SS 1/8 X 1/8), it is…
SKU 3G-OTH-471833
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The HAM-LET Compression Fitting Adapter is a double-ferrule stainless steel fitting in a tube x tube configuration, with 1/8 in OD x 1/8 in OD fitting size. Part of the Let-Lok series (MPN 767LT SS 1/8 X 1/8), it is compatible with Parker A-LOK fittings. 3G Electric interprets demand and delivers this genuine industrial component across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a HAM-LET compression fitting adapter used for?
A HAM-LET compression fitting adapter connects two tubes of equal outer diameter in instrumentation, hydraulic, and pneumatic systems. Its double-ferrule design provides a leak-tight seal in high-pressure gas and liquid lines across industries like chemical processing and oil and gas.
What are the specifications of the HAM-LET 767LT SS 1/8 X 1/8?
This HAM-LET compression fitting adapter is a tube x tube double-ferrule stainless steel fitting with 1/8 in OD x 1/8 in OD fitting size. It is part of the Let-Lok series (MPN 767LT SS 1/8 X 1/8) and is compatible with Parker A-LOK fittings.
Where to buy HAM-LET compression fittings worldwide?
3G Electric supplies genuine HAM-LET compression fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source this Let-Lok series adapter and support procurement across 14 departments including instrumentation and pneumatics.
How to install a HAM-LET double-ferrule compression fitting?
Insert the tube fully into the fitting until it bottoms against the shoulder. Hand-tighten the nut, then use a wrench to tighten 1-1/4 turns for 1/8 in OD tubing. Do not overtighten. Always follow the manufacturer's torque specifications and use proper tube support to avoid leaks.
Digunakan dalam
Aplikasi umum untuk HAM-LETHAM-LET Produk
3G Electric memasok HAM-LET double-ferrule stainless steel fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
