HAYWARD FLOW CONTROL Manual Two-Way Ball Valve: 2 1/2 in, PVC, Straight
The HAYWARD FLOW CONTROL Manual Two-Way Ball Valve is a 2 1/2 inch, straight, vented-ball PVC ball valve with a locking tee handle. It has a maximum pressure rating of 235 psi (CWP) and is identified by manufacturer…
SKU 3G-OTH-432591
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The HAYWARD FLOW CONTROL Manual Two-Way Ball Valve is a 2 1/2 inch, straight, vented-ball PVC ball valve with a locking tee handle. It has a maximum pressure rating of 235 psi (CWP) and is identified by manufacturer part number TBH1250A0SV0Z00.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the HAYWARD FLOW CONTROL manual two-way ball valve used for?
This HAYWARD FLOW CONTROL manual two-way ball valve is used for on/off flow control in industrial piping systems handling corrosive fluids. Its PVC construction and vented-ball design make it suitable for chemical processing, water treatment, and plating applications where leak protection and manual shutoff are required.
What are the specifications of the HAYWARD FLOW CONTROL TBH1250A0SV0Z00 ball valve?
The HAYWARD FLOW CONTROL TBH1250A0SV0Z00 is a 2 1/2 inch, straight, PVC ball valve with a vented ball and locking tee handle. It has a maximum pressure rating of 235 psi (CWP). The manufacturer part number is TBH1250A0SV0Z00, and it is designed for manual two-way operation.
Where to buy the HAYWARD FLOW CONTROL TBH1250A0SV0Z00 ball valve worldwide?
You can source the HAYWARD FLOW CONTROL TBH1250A0SV0Z00 ball valve through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this PVC ball valve.
How to install a HAYWARD FLOW CONTROL PVC ball valve?
To install a HAYWARD FLOW CONTROL PVC ball valve, ensure the pipe ends are clean and apply PVC primer and solvent cement per manufacturer instructions. Support the valve body to avoid stress on joints. Use the locking tee handle to verify full open/close position before pressurizing the system.
Digunakan dalam
Aplikasi umum untuk HAYWARD FLOW CONTROLHAYWARD FLOW CONTROL Produk
3G Electric memasok HAYWARD FLOW CONTROL vented-ball pvc ball valves. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
