HUBBELL Pin and Sleeve Connector: Red, 277/480V AC, Three Phase, 60 A, 4 Pole, 5 Wire
The HUBBELL Pin and Sleeve Connector (MPN HBLS560C7W) is a red, washdown-rated connector designed for three-phase, 60 A, 277/480V AC applications with 4 poles, 5 wires, and IEC grounding. 3G Electric interprets this…
SKU 3G-OTH-13524
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The HUBBELL Pin and Sleeve Connector (MPN HBLS560C7W) is a red, washdown-rated connector designed for three-phase, 60 A, 277/480V AC applications with 4 poles, 5 wires, and IEC grounding. 3G Electric interprets this demand and delivers this genuine industrial connector, sourcing it across our 14 departments with specialist depth in electrical controls to support your facility's power distribution needs.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the HUBBELL Pin and Sleeve Connector used for?
The HUBBELL Pin and Sleeve Connector (MPN HBLS560C7W) is used for industrial power distribution in washdown environments. It provides a reliable, water-resistant connection for three-phase equipment operating at 277/480V AC and 60 A, with 4 poles and 5 wires using IEC grounding.
What are the specifications of the HUBBELL Pin and Sleeve Connector?
This HUBBELL connector is rated for 277/480V AC, three-phase, 60 A, with 4 poles and 5 wires. It features IEC grounding and is designed as a washdown-rated connector for wet or sanitary industrial settings. The manufacturer part number is HBLS560C7W.
Where to buy the HUBBELL Pin and Sleeve Connector worldwide?
You can source the HUBBELL Pin and Sleeve Connector (HBLS560C7W) through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide locations, ensuring compliance with international shipping requirements.
How to install the HUBBELL Pin and Sleeve Connector?
Installation requires matching the connector's voltage (277/480V AC), current (60 A), and phase (three-phase) to the circuit. Ensure proper IEC grounding and a watertight seal for washdown environments. Follow HUBBELL's generic guidelines for pin alignment and torque specifications to avoid arcing.
Digunakan dalam
Aplikasi umum untuk HUBBELLHUBBELL Produk
3G Electric memasok HUBBELL washdown-rated connectors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















