HUBBELL GFCI Receptacle: Hospital Grade Fed. Spec., Decorator Duplex, 5-20R, Ivory, GFCI
The HUBBELL GFCI Receptacle is a hospital-grade, specification-grade, decorator duplex general purpose receptacle (5-20R, Ivory) rated 125V AC. As a GFCI device, it provides ground-fault circuit interruption for…
SKU 3G-OTH-128835
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The HUBBELL GFCI Receptacle is a hospital-grade, specification-grade, decorator duplex general purpose receptacle (5-20R, Ivory) rated 125V AC. As a GFCI device, it provides ground-fault circuit interruption for personnel protection in healthcare and other critical environments.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the HUBBELL GFCI SNAPGF83I used for?
The HUBBELL GFCI SNAPGF83I is a hospital-grade, decorator duplex receptacle used for ground-fault circuit-interruption protection in healthcare facilities, labs, and commercial settings. It provides personnel protection against electrical shock in wet or damp locations where 125V AC, 20A circuits are required.
What are the specifications of the HUBBELL GFCI SNAPGF83I?
The HUBBELL GFCI SNAPGF83I is a 125V AC, 20A, hospital-grade decorator duplex receptacle with a 5-20R configuration and ivory finish. It meets Federal Specification requirements and includes built-in GFCI protection. The manufacturer part number is SNAPGF83I.
Where to buy HUBBELL GFCI SNAPGF83I worldwide?
3G Electric supplies the HUBBELL GFCI SNAPGF83I worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this hospital-grade GFCI receptacle globally.
How to install the HUBBELL GFCI SNAPGF83I?
Install the HUBBELL GFCI SNAPGF83I by first turning off power at the breaker. Connect line and load wires to the appropriate terminals per the wiring diagram, ensuring correct polarity. Test the GFCI by pressing the TEST button; the RESET button should pop out. Press RESET to restore power. Follow local electrical codes.
Digunakan dalam
Aplikasi umum untuk HUBBELL GFCIHUBBELL GFCI Produk
3G Electric memasok HUBBELL GFCI general purpose receptacles. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















