HUBBELL WIRING DEVICE-KELLEMS Occupancy Sensor: LED, Passive Infrared (PIR), 24V DC
The HUBBELL WIRING DEVICE-KELLEMS Occupancy Sensor: LED is a ceiling-mount occupancy sensor from Hubbell. It operates on 24V DC and is hard wired, with a rating dependent on the control unit rating. This passive…
SKU 3G-OTH-419396
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The HUBBELL WIRING DEVICE-KELLEMS Occupancy Sensor: LED is a ceiling-mount occupancy sensor from Hubbell. It operates on 24V DC and is hard wired, with a rating dependent on the control unit rating. This passive infrared (PIR) sensor is designed for occupancy detection.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the HUBBELL WIRING DEVICE-KELLEMS ATP1500C occupancy sensor used for?
The ATP1500C is a ceiling-mount passive infrared (PIR) occupancy sensor from Hubbell. It detects motion to automatically control lighting in commercial or industrial spaces, helping reduce energy waste. It operates on 24V DC and is hard wired, with its load rating dependent on the connected control unit.
What are the specifications of the HUBBELL WIRING DEVICE-KELLEMS ATP1500C?
The ATP1500C is a ceiling-mount occupancy sensor from Hubbell. It uses passive infrared (PIR) technology, operates on 24V DC, and is hard wired. Its load rating is dependent on the control unit rating. The manufacturer part number is ATP1500C.
Where to buy the HUBBELL WIRING DEVICE-KELLEMS ATP1500C worldwide?
3G Electric supplies the Hubbell ATP1500C occupancy sensor to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery. Contact us to order this ceiling-mount PIR sensor for your facility.
How to install the HUBBELL WIRING DEVICE-KELLEMS ATP1500C occupancy sensor?
Install the Hubbell ATP1500C as a hard-wired, ceiling-mount device. Ensure power is off, connect 24V DC supply per local codes, and mount securely. The sensor's load rating depends on the control unit; verify compatibility before installation. Follow the manufacturer's wiring diagram for proper setup.
Digunakan dalam
Aplikasi umum untuk HUBBELL WIRING DEVICE-KELLEMSHUBBELL WIRING DEVICE-KELLEMS Produk
3G Electric memasok HUBBELL WIRING DEVICE-KELLEMS ceiling-mount occupancy sensors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.














