HUBBELL WIRING DEVICE-KELLEMS Control Unit: CU300, Fluorescent/Incandescent/LED, Hard Wired
The HUBBELL WIRING DEVICE-KELLEMS Control Unit CU300 is a hard-wired power and relay control unit with an input voltage of 120 to 277V AC and an output voltage of 24V DC. It is compatible with the CU300 series and…
SKU 3G-OTH-385462
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The HUBBELL WIRING DEVICE-KELLEMS Control Unit CU300 is a hard-wired power and relay control unit with an input voltage of 120 to 277V AC and an output voltage of 24V DC. It is compatible with the CU300 series and supports incandescent lighting technology.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the HUBBELL WIRING DEVICE-KELLEMS CU300 control unit used for?
The CU300 control unit is used for switching and controlling incandescent, fluorescent, or LED lighting loads in commercial and industrial facilities. It operates as a hard-wired relay, accepting 120 to 277V AC input and providing 24V DC output for low-voltage control systems.
What are the specifications of the HUBBELL WIRING DEVICE-KELLEMS CU300HD?
The CU300HD has an input voltage of 120 to 277V AC and an output voltage of 24V DC. It supports incandescent lighting technology, uses hard-wired communication, and is compatible with the CU300 series. The manufacturer part number is CU300HD, and it is made by HUBBELL WIRING DEVICE-KELLEMS.
Where to buy the HUBBELL WIRING DEVICE-KELLEMS CU300HD worldwide?
3G Electric supplies the HUBBELL WIRING DEVICE-KELLEMS CU300HD control unit worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time.
How to install the HUBBELL WIRING DEVICE-KELLEMS CU300 control unit?
Installation requires connecting the 120 to 277V AC input to the line side and the 24V DC output to the low-voltage control circuit. The unit is hard-wired, so follow local electrical codes and ensure power is off before wiring. Use a qualified electrician for safe setup.
Digunakan dalam
Aplikasi umum untuk HUBBELL WIRING DEVICE-KELLEMSHUBBELL WIRING DEVICE-KELLEMS Produk
3G Electric memasok HUBBELL WIRING DEVICE-KELLEMS power & relay control units. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









