HUBBELL WIRING DEVICE-KELLEMS Pendant Control Station: (2) Push Buttons, 1NO/1NC
The HUBBELL WIRING DEVICE-KELLEMS Pendant Control Station (MPN CPB20) is a push-button pendant with two momentary/momentary push buttons labeled Start/Stop. It features a dead-end hub style, a nylon enclosure, and…
SKU 3G-OTH-28407
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The HUBBELL WIRING DEVICE-KELLEMS Pendant Control Station (MPN CPB20) is a push-button pendant with two momentary/momentary push buttons labeled Start/Stop. It features a dead-end hub style, a nylon enclosure, and vertical mounting orientation. Its AC contact rating is 6 A @ 120 V, and its DC contact rating is 1.1 A @ 125 V.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the HUBBELL WIRING DEVICE-KELLEMS CPB20 pendant control station used for?
The HUBBELL WIRING DEVICE-KELLEMS CPB20 is a push-button pendant control station used for remote start/stop control of industrial machinery, hoists, and conveyors. Its momentary/momentary action and nylon enclosure make it suitable for factory floor environments requiring durable, handheld operator control.
What are the specifications of the HUBBELL WIRING DEVICE-KELLEMS CPB20?
The CPB20 has two push buttons with Start/Stop legend, 1NO/1NC contact configuration, and momentary/momentary action. AC contact rating is 6 A @ 120 V; DC contact rating is 1.1 A @ 125 V. Enclosure is nylon, hub style is dead-end, and mounting orientation is vertical.
Where to buy the HUBBELL WIRING DEVICE-KELLEMS CPB20 worldwide?
3G Electric supplies the HUBBELL WIRING DEVICE-KELLEMS CPB20 worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time.
How to install a HUBBELL WIRING DEVICE-KELLEMS pendant control station?
Mount the CPB20 vertically using the dead-end hub to secure the cable entry. Connect the 1NO/1NC contacts per your control circuit wiring diagram. Ensure the nylon enclosure is properly sealed against moisture. Always follow local electrical codes and disconnect power before installation.
Digunakan dalam
Aplikasi umum untuk HUBBELL WIRING DEVICE-KELLEMSHUBBELL WIRING DEVICE-KELLEMS Produk
3G Electric memasok HUBBELL WIRING DEVICE-KELLEMS push-button pendants. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.








