HUBBELL WIRING DEVICE-KELLEMS Lampholder: Lamp Holder, Single Pin (Fa8), Std Product
The HUBBELL WIRING DEVICE-KELLEMS Lampholder is a lamp holder designed for single-pin (Fa8) lamps. It is rated for 600V AC and 660 W, and comes in a white finish as a standard product (MPN RL311).
SKU 3G-OTH-427226
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The HUBBELL WIRING DEVICE-KELLEMS Lampholder is a lamp holder designed for single-pin (Fa8) lamps. It is rated for 600V AC and 660 W, and comes in a white finish as a standard product (MPN RL311).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the HUBBELL WIRING DEVICE-KELLEMS RL311 lampholder used for?
The RL311 lampholder is designed for single-pin (Fa8) lamps in industrial and commercial lighting fixtures. It supports up to 660 W at 600V AC, making it suitable for high-wattage applications such as warehouse or factory overhead lighting where reliable lamp retention is required.
What are the specifications of the HUBBELL WIRING DEVICE-KELLEMS RL311 lampholder?
The RL311 is a standard-product lampholder accepting single-pin (Fa8) lamps. It is rated for 600V AC and 660 W maximum wattage. The housing is white. This HUBBELL WIRING DEVICE-KELLEMS model is part number RL311 and is built for industrial-grade lamp support.
Where to buy the HUBBELL WIRING DEVICE-KELLEMS RL311 lampholder worldwide?
3G Electric supplies the HUBBELL WIRING DEVICE-KELLEMS RL311 lampholder to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time; we source genuine industrial components across 14 departments including lighting and electrical.
How to install the HUBBELL WIRING DEVICE-KELLEMS RL311 lampholder?
Installation should follow the manufacturer's instructions and local electrical codes. Ensure power is off before wiring. The Fa8 single-pin base requires aligning the lamp pins with the holder slots. Use wire connectors rated for 600V AC. Tighten terminal screws to the torque specified by HUBBELL WIRING DEVICE-KELLEMS.
Digunakan dalam
Aplikasi umum untuk HUBBELL WIRING DEVICE-KELLEMSHUBBELL WIRING DEVICE-KELLEMS Produk
3G Electric memasok HUBBELL WIRING DEVICE-KELLEMS lampholders & sockets. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
