HUBBELL WIRING DEVICE-KELLEMS GFCI: Manual Reset, 3 ft Lg, 12/3, 5-20P Plug
The HUBBELL WIRING DEVICE-KELLEMS GFCI: Manual Reset is an inline GFCI cord with a 3 ft length, 12/3 gauge, and a 20 A current rating at 120V AC. It features a NEMA 5-20P plug and a NEMA 5-20R receptacle…
SKU 3G-OTH-40729
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The HUBBELL WIRING DEVICE-KELLEMS GFCI: Manual Reset is an inline GFCI cord with a 3 ft length, 12/3 gauge, and a 20 A current rating at 120V AC. It features a NEMA 5-20P plug and a NEMA 5-20R receptacle configuration (MPN GFPST3C20M). This manual-reset device provides ground fault protection for connected equipment.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the HUBBELL WIRING DEVICE-KELLEMS GFCI GFPST3C20M used for?
This inline GFCI cord provides ground fault protection for connected equipment in industrial and commercial settings. It is commonly used with power tools, pumps, and temporary power distribution where a manual-reset device is required to prevent accidental re-energization after a fault.
What are the specifications of the HUBBELL WIRING DEVICE-KELLEMS GFCI GFPST3C20M?
The GFPST3C20M is a 3 ft inline GFCI cord with 12/3 gauge wire, rated 20 A at 120V AC. It features a NEMA 5-20P plug and a NEMA 5-20R receptacle. The manual-reset design requires user intervention to restore power after a ground fault, enhancing safety.
Where to buy the HUBBELL WIRING DEVICE-KELLEMS GFCI GFPST3C20M worldwide?
3G Electric supplies the HUBBELL WIRING DEVICE-KELLEMS GFPST3C20M worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time.
How to install the HUBBELL WIRING DEVICE-KELLEMS GFCI GFPST3C20M?
Installation is straightforward: plug the NEMA 5-20P end into a compatible 120V AC outlet, then connect your equipment to the 5-20R receptacle. The manual-reset GFCI will trip on ground fault; press the reset button to restore power. Always follow local electrical codes and verify the cord is rated for your load.
Digunakan dalam
Aplikasi umum untuk HUBBELL WIRING DEVICE-KELLEMSHUBBELL WIRING DEVICE-KELLEMS Produk
3G Electric memasok HUBBELL WIRING DEVICE-KELLEMS inline gfci cords. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.













