Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
Rahang Bubut HURON: Runcing, Lidah dan Alur, Baja, Untuk Chuck 18 inci - Pointed Tongue-and-Groove Lathe Jaws
HURONPointed Tongue-and-Groove Lathe Jaws

Rahang Bubut HURON: Runcing, Lidah dan Alur, Baja, Untuk Chuck 18 inci

Rahang bubut HURON tipe pointed dengan sistem tongue and groove ini dirancang khusus untuk chuck 18 inci. Terbuat dari baja dengan tinggi 2,75 inci dan lebar 3/4 inci, rahang ini memberikan cengkeraman presisi untuk…

SKU 3G-OTH-244842

Juga terdaftar sebagai: 18 MSHOP · 18-MSHOP

Merek
HURON
Item
Rahang Bubut HURON: Runcing, Lidah dan Alur, Baja, Untuk Chuck 18 inci
Kategori
Pointed Tongue-and-Groove Lathe Jaws
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

HURON
Manufacturer Part Number
18MSHOP

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

HURON Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Rahang bubut HURON tipe pointed dengan sistem tongue and groove ini dirancang khusus untuk chuck 18 inci. Terbuat dari baja dengan tinggi 2,75 inci dan lebar 3/4 inci, rahang ini memberikan cengkeraman presisi untuk aplikasi pembubutan industri. Sebagai suku cadang pembubutan yang andal, produk ini cocok untuk berbagai kebutuhan peralatan industri di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa rahang bubut HURON pointed tongue and groove digunakan?

Rahang bubut HURON tipe pointed dengan sistem tongue and groove ini digunakan untuk mencengkeram benda kerja pada mesin bubut dengan chuck 18 inci. Desain pointed memungkinkan kontak titik yang presisi, cocok untuk pekerjaan pembubutan yang memerlukan akurasi tinggi.

Apa spesifikasi rahang bubut HURON 18MSHOP?

Rahang bubut HURON dengan nomor part 18MSHOP memiliki spesifikasi: tinggi 2,75 inci, lebar 3/4 inci, material baja, tipe pointed dengan sistem tongue and groove, dan dirancang untuk chuck 18 inci.

Di mana beli rahang bubut HURON di Indonesia?

Anda dapat membeli rahang bubut HURON asli melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat fokus pada operasional pabrik.

Bagaimana cara memilih rahang bubut yang tepat untuk chuck 18 inci?

Pastikan rahang bubut memiliki sistem tongue and groove yang kompatibel dengan chuck Anda. Untuk chuck 18 inci, rahang HURON tipe pointed dengan tinggi 2,75 inci dan lebar 3/4 inci adalah pilihan yang sesuai. Periksa juga material baja untuk ketahanan aus.

Digunakan dalam

Aplikasi umum untuk HURON
Metal fabrication – HURON square serrated aluminum jaws (AKT10) for gripping steel tubes on 10 in chucks during welding prep.
Automotive machining – HURON pointed serrated steel jaws (KT6PL) for holding small-diameter shafts on 6 in chucks in a CNC lathe.
General engineering – HURON tongue-and-groove aluminum jaws (A10MSH) for finishing aluminum parts on 10 in chucks without marring.
Heavy equipment repair – HURON full-grip round serrated aluminum jaws (AKT215MHFG) for clamping large-diameter flanges on 15 in chucks.
Tool and die making – HURON pointed tongue-and-groove steel jaws (18MSHOP) for holding irregular die components on 18 in chucks.
Maintenance turnaround – HURON replacement jaw nuts (KT215JN) for restoring grip on 15 in chucks during scheduled downtime.

HURON Produk

3G Electric memasok HURON pointed tongue-and-groove lathe jaws. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This steel lathe jaw features a pointed profile with tongue-and-groove design for secure clamping of irregular or round workpieces. Designed for use with a 15-inch chuck, it has a height of 2.25 inches and a key dimension of 5/8 inch. Suitable for turning, facing, and boring operations in metalworking
HURON
This steel lathe jaw features a pointed profile with tongue-and-groove design for secure clamping of irregular or round workpieces. Designed for use with a 15-inch chuck, it has a height of 2.25 inches and a key dimension of 5/8 inch. Suitable for turning, facing, and boring operations in metalworking
Aluminum lathe jaw with pointed tongue-and-groove design for gripping irregular or round workpieces. Height 2.75 in, compatible with 18 in chucks. Used in turning, facing, and boring operations on manual or CNC lathes
HURON
Aluminum lathe jaw with pointed tongue-and-groove design for gripping irregular or round workpieces. Height 2.75 in, compatible with 18 in chucks. Used in turning, facing, and boring operations on manual or CNC lathes
Steel pointed tongue-and-groove lathe jaw designed for use with a 15-inch chuck. Height of 3.75 inches with a 5/8 inch key specification. Used for gripping irregular or round workpieces in metalworking operations such as turning, facing, and boring
HURON
Steel pointed tongue-and-groove lathe jaw designed for use with a 15-inch chuck. Height of 3.75 inches with a 5/8 inch key specification. Used for gripping irregular or round workpieces in metalworking operations such as turning, facing, and boring
This steel lathe jaw features a pointed profile with tongue-and-groove design for secure clamping of irregular or round workpieces in a 6-inch chuck. With a height of 1.38 inches and a 3/8-inch key specification, it is suited for general metalworking and fabrication operations on lathes
HURON
This steel lathe jaw features a pointed profile with tongue-and-groove design for secure clamping of irregular or round workpieces in a 6-inch chuck. With a height of 1.38 inches and a 3/8-inch key specification, it is suited for general metalworking and fabrication operations on lathes
This HURON lathe jaw is a pointed, tongue-and-groove steel jaw designed for use with a 12-inch chuck. It has a height of 2.12 inches and a 1/2-inch key specification. The pointed profile provides secure clamping for irregular or round workpieces during turning, facing, and boring operations in metalworking
HURON
This HURON lathe jaw is a pointed, tongue-and-groove steel jaw designed for use with a 12-inch chuck. It has a height of 2.12 inches and a 1/2-inch key specification. The pointed profile provides secure clamping for irregular or round workpieces during turning, facing, and boring operations in metalworking
This steel pointed tongue-and-groove lathe jaw is designed for use with an 8-inch chuck. It provides secure clamping for irregular or round workpieces in metalworking and machining operations such as turning and facing
HURON
This steel pointed tongue-and-groove lathe jaw is designed for use with an 8-inch chuck. It provides secure clamping for irregular or round workpieces in metalworking and machining operations such as turning and facing

Lainnya dari HURON

Lihat semua HURON suku cadang →
Aluminum tongue-and-groove lathe jaw with pointed profile, 1.88 in height, for use with 10 in chucks. Designed to grip irregular or small workpieces during turning and facing operations
HURON
Aluminum tongue-and-groove lathe jaw with pointed profile, 1.88 in height, for use with 10 in chucks. Designed to grip irregular or small workpieces during turning and facing operations
This steel lathe jaw features a pointed tongue-and-groove design for positive gripping of irregularly shaped or small workpieces. It is intended for use with an 8-inch chuck in turning, facing, and boring operations. The jaw has a height of 1.88 inches and a key specification of 3/8 inch
HURON
This steel lathe jaw features a pointed tongue-and-groove design for positive gripping of irregularly shaped or small workpieces. It is intended for use with an 8-inch chuck in turning, facing, and boring operations. The jaw has a height of 1.88 inches and a key specification of 3/8 inch
This HURON lathe jaw features a pointed profile and tongue-and-groove design for secure clamping of irregular or small workpieces in a 10-inch chuck. Made of steel, it has a height of 3.38 inches and a 1/2-inch key specification. Suitable for turning, facing, and boring operations
HURON
This HURON lathe jaw features a pointed profile and tongue-and-groove design for secure clamping of irregular or small workpieces in a 10-inch chuck. Made of steel, it has a height of 3.38 inches and a 1/2-inch key specification. Suitable for turning, facing, and boring operations
Steel lathe jaw with pointed tip and tongue-and-groove design for use with a 6-inch chuck. Height of 3.38 inches, key specification 3/8 inch. Provides positive location and alignment for gripping irregular or small workpieces during turning, facing, or boring operations
HURON
Steel lathe jaw with pointed tip and tongue-and-groove design for use with a 6-inch chuck. Height of 3.38 inches, key specification 3/8 inch. Provides positive location and alignment for gripping irregular or small workpieces during turning, facing, or boring operations
This pointed tongue-and-groove lathe jaw is made of steel and designed for use with a 12-inch chuck. It features a height of 3.88 inches and a 1/2-inch key specification. Commonly used in turning, facing, and boring operations on manual and CNC lathes for gripping irregular or small workpieces
HURON
This pointed tongue-and-groove lathe jaw is made of steel and designed for use with a 12-inch chuck. It features a height of 3.88 inches and a 1/2-inch key specification. Commonly used in turning, facing, and boring operations on manual and CNC lathes for gripping irregular or small workpieces
This pointed tongue-and-groove lathe jaw is made of aluminum and designed for use with an 18-inch chuck. It has a height of 4.75 inches and a 3/4-inch key specification. Typical applications include gripping irregular or round workpieces in turning and machining operations
HURON
This pointed tongue-and-groove lathe jaw is made of aluminum and designed for use with an 18-inch chuck. It has a height of 4.75 inches and a 3/4-inch key specification. Typical applications include gripping irregular or round workpieces in turning and machining operations
This pointed tongue-and-groove lathe jaw is made of steel and designed for use with an 18-inch chuck. It has a height of 4.75 inches and a key specification of 3/4 inch. Used for gripping and centering workpieces in metalworking lathes for turning, facing, and boring operations
HURON
This pointed tongue-and-groove lathe jaw is made of steel and designed for use with an 18-inch chuck. It has a height of 4.75 inches and a key specification of 3/4 inch. Used for gripping and centering workpieces in metalworking lathes for turning, facing, and boring operations
Aluminum pointed tongue-and-groove lathe jaw for 6-inch chucks. Height 1.38 inches. Used for gripping and centering workpieces in lathe operations, providing secure clamping for irregular or small parts
HURON
Aluminum pointed tongue-and-groove lathe jaw for 6-inch chucks. Height 1.38 inches. Used for gripping and centering workpieces in lathe operations, providing secure clamping for irregular or small parts