IEC Miniature Cct Breaker, 35 A
The IEC Miniature Cct Breaker, 35 A, 4 in (MPN FAZ-C35/4-NA) is a C-Curve, 4-Pole UL489 DIN Rail-Mount Miniature Circuit Breaker from the brand IEC. It is rated for 277/480V AC with an interrupting capacity of 10 kA…
SKU 3G-OTH-129712
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The IEC Miniature Cct Breaker, 35 A, 4 in (MPN FAZ-C35/4-NA) is a C-Curve, 4-Pole UL489 DIN Rail-Mount Miniature Circuit Breaker from the brand IEC. It is rated for 277/480V AC with an interrupting capacity of 10 kA at 277/480V AC, and features screw-type terminals. This product is manufactured by EATON.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the IEC FAZ-C35/4-NA miniature circuit breaker used for?
The IEC FAZ-C35/4-NA is a C-Curve, 4-Pole UL489 DIN Rail-Mount miniature circuit breaker rated 35 A at 277/480V AC. It protects branch circuits in industrial control panels, motor control centers, and distribution boards against overloads and short circuits, with a 10 kA interrupting capacity.
What are the specifications of the IEC FAZ-C35/4-NA circuit breaker?
The IEC FAZ-C35/4-NA is a 35 A, 4-pole C-Curve miniature circuit breaker rated 277/480V AC with a 10 kA interrupting capacity at 277/480V AC. It features screw-type terminals and is manufactured by EATON. It mounts on a standard DIN rail and complies with UL489.
Where to buy the IEC FAZ-C35/4-NA circuit breaker worldwide?
3G Electric supplies the IEC FAZ-C35/4-NA miniature circuit breaker worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this EATON-manufactured breaker.
How to install the IEC FAZ-C35/4-NA circuit breaker on a DIN rail?
To install the IEC FAZ-C35/4-NA, snap the breaker onto a standard 35 mm DIN rail until it locks. Connect phase conductors to the screw terminals (torque to manufacturer specification) and the neutral/ground as required. Ensure the breaker is off before wiring and verify voltage rating matches your system.
Digunakan dalam
Aplikasi umum untuk IECIEC Produk
3G Electric memasok IEC c-curve, 4-pole ul489 din rail-mount miniature circuit breakers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















