IKA Beater: 0002900001, A 11 Basic Analytical Mill, 60EK49
The IKA Beater (SKU 60EK69, MPN 0002983000) is a stainless steel grinder cutter and beater designed for use with the IKA A 11 Basic Analytical Mill. It is compatible with Grainger Part Number 60EK49 and Manufacturer…
SKU 3G-OTH-366056
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The IKA Beater (SKU 60EK69, MPN 0002983000) is a stainless steel grinder cutter and beater designed for use with the IKA A 11 Basic Analytical Mill. It is compatible with Grainger Part Number 60EK49 and Manufacturer Model Number 0002900001.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the IKA Beater 0002983000 used for?
The IKA Beater 0002983000 is a stainless steel grinding cutter designed for use with the IKA A 11 Basic Analytical Mill. It is used in laboratory and industrial settings to pulverize and homogenize dry, brittle samples for analysis, such as grains, tablets, or minerals.
What are the specifications of the IKA Beater 0002983000?
The IKA Beater (MPN 0002983000) is made of stainless steel and is compatible with the IKA A 11 Basic Analytical Mill. It replaces Grainger part number 60EK49 and manufacturer model number 0002900001. This beater is a direct-fit component for the mill's grinding assembly.
Where to buy the IKA Beater 0002983000 worldwide?
You can source the IKA Beater 0002983000 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we supply this IKA beater for laboratory mills.
How to install the IKA Beater on an A 11 Basic Analytical Mill?
To install the IKA Beater, first disconnect the mill from power. Open the grinding chamber, remove the existing cutter, and align the new stainless steel beater onto the drive shaft. Secure it with the locking nut, close the chamber, and verify it rotates freely before operation.
Digunakan dalam
Aplikasi umum untuk IKAIKA Produk
3G Electric memasok IKA grinder cutters & beaters. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
