INA 2 Bolt Flange Bearing: Radial Ball, 30 mm Bore, Cast Iron, Eccentric Collar
The INA GLCTE30-N is a general purpose 2-bolt flange-mount ball bearing with a 30 mm cylindrical bore. It features a cast iron, non-split rhombus housing, an eccentric collar, and is lubricated with lithium complex…
SKU 3G-OTH-120198
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The INA GLCTE30-N is a general purpose 2-bolt flange-mount ball bearing with a 30 mm cylindrical bore. It features a cast iron, non-split rhombus housing, an eccentric collar, and is lubricated with lithium complex grease. The metric unit uses M10 mounting bolts.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the INA GLCTE30-N flange bearing used for?
The INA GLCTE30-N is a general purpose 2-bolt flange-mount ball bearing used to support rotating shafts in industrial machinery. It is suitable for applications requiring radial load support, such as conveyors, fans, and material handling equipment, where easy mounting and alignment are needed.
What are the specifications of the INA GLCTE30-N bearing?
The INA GLCTE30-N has a 30 mm cylindrical bore, cast iron rhombus housing, and an eccentric collar for shaft locking. It uses M10 mounting bolts, is lubricated with lithium complex grease, and is a non-split, metric unit. The housing length is 84 mm.
Where to buy the INA GLCTE30-N bearing worldwide?
You can source the INA GLCTE30-N bearing through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this INA part.
How to install the INA GLCTE30-N flange bearing?
To install the INA GLCTE30-N, first clean the shaft and housing bore. Slide the bearing onto the shaft, align the flange bolt holes with the mounting surface, and tighten the M10 bolts evenly. Secure the shaft using the eccentric collar by rotating it in the shaft's direction of rotation and tightening the set screw.
Digunakan dalam
Aplikasi umum untuk INAINA Produk
3G Electric memasok INA general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
