INA 2 Bolt Flange Bearing: Radial Ball, 30 mm Bore, Cast Iron, Eccentric Collar
The INA PCFT30-XL is a general-purpose 2-bolt flange-mount ball bearing with a 30 mm cylindrical bore and a cast iron housing that is not split. It features an eccentric collar and is lubricated with lithium complex…
SKU 3G-OTH-119338
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The INA PCFT30-XL is a general-purpose 2-bolt flange-mount ball bearing with a 30 mm cylindrical bore and a cast iron housing that is not split. It features an eccentric collar and is lubricated with lithium complex grease, with a mounting bolt size of M10. This metric unit measures 80 mm in length and 40 mm in width.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the INA PCFT30-XL flange bearing used for?
The INA PCFT30-XL is a general-purpose 2-bolt flange-mount ball bearing used in industrial conveyors, fans, and material-handling equipment. Its cast iron housing and eccentric collar provide reliable radial load support in moderate-speed applications. 3G Electric supplies this bearing worldwide.
What are the specifications of the INA PCFT30-XL?
The INA PCFT30-XL has a 30 mm cylindrical bore, cast iron housing (not split), and an eccentric collar. It is lubricated with lithium complex grease, uses M10 mounting bolts, and measures 80 mm length by 40 mm width. This metric unit is a general-purpose radial ball bearing.
Where to buy the INA PCFT30-XL worldwide?
You can source the INA PCFT30-XL through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this INA flange bearing.
How to install the INA PCFT30-XL flange bearing?
Mount the INA PCFT30-XL on a clean shaft, tighten the eccentric collar in the shaft rotation direction, and secure with M10 bolts to a flat flange surface. Apply moderate torque per standard practice. Lubrication is pre-applied with lithium complex grease; re-grease intervals depend on operating conditions.
Digunakan dalam
Aplikasi umum untuk INAINA Produk
3G Electric memasok INA general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
