INDUSTRIAL SCIENTIFIC Calibration Gas: Nitrogen, +/-10% Accuracy, H2S, Calibration Gas
The INDUSTRIAL SCIENTIFIC Calibration Gas: Nitrogen (MPN 18109578) is a +/-10% accuracy, H2S calibration gas supplied in a 6-pack, with a gas mixture of Hydrogen Sulphide 40 ppm and a background gas of Nitrogen…
SKU 3G-OTH-549351
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The INDUSTRIAL SCIENTIFIC Calibration Gas: Nitrogen (MPN 18109578) is a +/-10% accuracy, H2S calibration gas supplied in a 6-pack, with a gas mixture of Hydrogen Sulphide 40 ppm and a background gas of Nitrogen. Designed for use with Mfr. No. 09565, this calibration gas is essential for verifying the performance of portable gas detectors.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is INDUSTRIAL SCIENTIFIC Calibration Gas 18109578 used for?
This calibration gas is used to verify the performance of portable gas detectors, specifically those compatible with Mfr. No. 09565. It contains 40 ppm Hydrogen Sulphide in a Nitrogen background, ensuring accurate sensor response for H2S detection in industrial safety applications.
What are the specifications of INDUSTRIAL SCIENTIFIC Calibration Gas 18109578?
The INDUSTRIAL SCIENTIFIC Calibration Gas (MPN 18109578) is a 6-pack with +/-10% accuracy. It contains a gas mixture of Hydrogen Sulphide 40 ppm with a background gas of Nitrogen. It is designed for use with Mfr. No. 09565 portable gas detectors.
Where to buy INDUSTRIAL SCIENTIFIC Calibration Gas 18109578 worldwide?
3G Electric supplies the INDUSTRIAL SCIENTIFIC Calibration Gas 18109578 worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this calibration gas to your facility, ensuring compliance with safety verification requirements.
How to use INDUSTRIAL SCIENTIFIC Calibration Gas 18109578 for detector calibration?
Attach the calibration gas cylinder to the detector's inlet using the appropriate regulator and tubing. Apply the gas at the recommended flow rate, typically 0.5 L/min, and allow the sensor to stabilize. Compare the reading to the certified 40 ppm H2S concentration to verify accuracy.
INDUSTRIAL SCIENTIFIC Produk
3G Electric memasok INDUSTRIAL SCIENTIFIC calibration gases for portable gas detectors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
