IPTCI BEARINGS 4 Bolt Flange Bearing: Radial Ball, 30 mm Bore, PBT Plastic
The IPTCI BEARINGS 4 Bolt Flange Bearing is a washdown flange-mount ball bearing with a 30 mm cylindrical bore and a PBT plastic housing. It uses H-1 grease lubricant and set screws for mounting, with a 3/8 in…
SKU 3G-OTH-103257
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The IPTCI BEARINGS 4 Bolt Flange Bearing is a washdown flange-mount ball bearing with a 30 mm cylindrical bore and a PBT plastic housing. It uses H-1 grease lubricant and set screws for mounting, with a 3/8 in mounting bolt size and a 108 mm length. This metric unit is not split and carries the manufacturer part number SUCTF206-30MM IP69K.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the IPTCI BEARINGS 4 Bolt Flange Bearing used for?
This washdown flange-mount ball bearing is designed for food processing, beverage, and pharmaceutical applications where frequent washdowns occur. Its PBT plastic housing resists corrosion and chemical cleaning agents, while H-1 grease lubricant meets food-grade safety requirements.
What are the specifications of the IPTCI BEARINGS SUCTF206-30MM IP69K?
This bearing has a 30 mm cylindrical bore, PBT plastic housing, and 108 mm length. It uses set screws for shaft mounting, a 3/8 in mounting bolt size, and H-1 grease lubricant. The housing is not split and the system of measurement is metric.
Where to buy the IPTCI BEARINGS 4 Bolt Flange Bearing worldwide?
3G Electric supplies and delivers the IPTCI BEARINGS SUCTF206-30MM IP69K worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure the bearing reaches your facility, regardless of location.
How to install the IPTCI BEARINGS washdown flange bearing?
Align the bearing housing with the mounting surface and secure using 3/8 in bolts through the four flange holes. Tighten the set screws onto the shaft to lock the 30 mm bore. Ensure the shaft is clean and lubricated with H-1 grease before installation.
Digunakan dalam
Aplikasi umum untuk IPTCI BEARINGSIPTCI BEARINGS Produk
3G Electric memasok IPTCI BEARINGS washdown flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
