IPTCI BEARINGS 3 Bolt Flange Bearing: Radial Ball, 1 1/4 in Bore, PBT Plastic
The IPTCI BEARINGS 3 Bolt Flange Bearing is a food-grade flange-mount radial ball bearing with a 1 1/4 in cylindrical bore and a PBT plastic housing. It uses H-1 grease lubricant and is secured with set screws…
SKU 3G-OTH-101909
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The IPTCI BEARINGS 3 Bolt Flange Bearing is a food-grade flange-mount radial ball bearing with a 1 1/4 in cylindrical bore and a PBT plastic housing. It uses H-1 grease lubricant and is secured with set screws, featuring a 7/16 in mounting bolt size and an inch system of measurement.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the IPTCI BEARINGS 3 Bolt Flange Bearing used for?
This food-grade flange-mount radial ball bearing is designed for conveyor and processing equipment in food and beverage plants. Its PBT plastic housing resists corrosion and washdown, while H-1 grease lubricant meets incidental food-contact safety requirements.
What are the specifications of the IPTCI BEARINGS SUCTFB207-20?
The IPTCI BEARINGS SUCTFB207-20 has a 1 1/4 in cylindrical bore, PBT plastic housing, H-1 grease lubricant, and set-screw locking. It uses a 7/16 in mounting bolt, is not split, and follows inch-system measurement. It is a 3-bolt flange bearing.
Where to buy IPTCI BEARINGS 3 Bolt Flange Bearing worldwide?
3G Electric supplies and delivers the IPTCI BEARINGS 3 Bolt Flange Bearing worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure the bearing reaches your facility, regardless of location.
How to install the IPTCI BEARINGS 3 Bolt Flange Bearing?
Mount the bearing on a clean, flat surface using 7/16 in bolts through the three flange holes. Tighten set screws evenly against the shaft to secure the 1 1/4 in bore. Apply moderate torque; avoid over-tightening to prevent housing stress. Lubrication is pre-applied with H-1 grease.
Digunakan dalam
Aplikasi umum untuk IPTCI BEARINGSIPTCI BEARINGS Produk
3G Electric memasok IPTCI BEARINGS food-grade flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
