ITW BUILDEX Wall Anchor: 1/2 in Dia, 1 5/8 in Overall Lg, #8 to #18 Thread Size, Plain
The ITW BUILDEX Wall Anchor is a standard self-threading anchor with a 1/2 in diameter, 1 5/8 in overall length, and #8 to #18 thread size, designed for drywall. This plain-finish anchor comes in a 1,500-pack (MPN…
SKU 3G-OTH-530421
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ITW BUILDEX Wall Anchor is a standard self-threading anchor with a 1/2 in diameter, 1 5/8 in overall length, and #8 to #18 thread size, designed for drywall. This plain-finish anchor comes in a 1,500-pack (MPN 5000900) and is measured in inches.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ITW BUILDEX Wall Anchor used for?
The ITW BUILDEX Wall Anchor is a standard self-threading anchor designed for drywall. It secures fixtures, shelving, or brackets into drywall without a pre-drilled pilot hole, making it ideal for light- to medium-duty mounting in commercial and residential construction.
What are the specifications of the ITW BUILDEX Wall Anchor 5000900?
This ITW BUILDEX anchor has a 1/2 in diameter, 1 5/8 in overall length, and accommodates #8 to #18 thread sizes. It features a plain finish, is compatible with drywall, and comes in a 1,500-pack (MPN 5000900). The system of measurement is inch.
Where to buy ITW BUILDEX Wall Anchors in worldwide?
3G Electric supplies ITW BUILDEX Wall Anchors worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver these anchors to your facility. Contact us for pricing and lead time on this 1,500-pack (MPN 5000900).
How to install ITW BUILDEX self-threading anchors in drywall?
To install, simply drive the ITW BUILDEX anchor into drywall using a screwdriver or drill with a compatible bit until flush. The self-threading design cuts into the material for a secure hold. Avoid over-torquing to prevent wall damage. Always follow manufacturer guidelines for load limits.
ITW BUILDEX Produk
3G Electric memasok ITW BUILDEX standard self-threading anchors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
