JACO Female Elbow Compression Connector: 1/4 in OD x 1/8 in Pipe Size, Compression x FNPT
The JACO Female Elbow Compression Connector is a general purpose nylon compression fitting, type Compression x FNPT, in a 5-pack. It connects 1/4 in OD tubing to a 1/8 in pipe size, with manufacturer part number…
SKU 3G-OTH-476020
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The JACO Female Elbow Compression Connector is a general purpose nylon compression fitting, type Compression x FNPT, in a 5-pack. It connects 1/4 in OD tubing to a 1/8 in pipe size, with manufacturer part number 45-4-2-N-PG.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the JACO Female Elbow Compression Connector used for?
The JACO Female Elbow Compression Connector is used to connect 1/4 in OD tubing to a 1/8 in pipe size in pneumatic or low-pressure fluid systems. Its 90-degree elbow design saves space in tight installations. JACO fittings are commonly applied in instrumentation, control panels, and general industrial tubing runs.
What are the specifications of the JACO 45-4-2-N-PG compression fitting?
The JACO 45-4-2-N-PG is a general purpose nylon compression fitting, type Compression x FNPT, in a 5-pack. It connects 1/4 in OD tubing to a 1/8 in pipe size. The female elbow configuration allows a 90-degree turn. The manufacturer part number is 45-4-2-N-PG.
Where to buy JACO compression fittings in worldwide?
3G Electric supplies JACO compression fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the JACO 45-4-2-N-PG 5-pack or other JACO nylon fittings for your application.
How to install a JACO nylon compression fitting?
To install a JACO nylon compression fitting, cut tubing squarely, deburr the end, and slide the nut and ferrule onto the tube. Insert the tube fully into the fitting body, then hand-tighten the nut. Use a wrench for an additional 1/4 to 1/2 turn. Do not overtighten, as nylon can crack.
Digunakan dalam
Aplikasi umum untuk JACOJACO Produk
3G Electric memasok JACO general purpose nylon compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









