JACO Union Compression Connector: 1/4 in OD x 1/4 in OD Size, Compression x Compression
The JACO Union Compression Connector is a polypropylene compression tube fitting in a 5-pack, designed for 1/4 in OD x 1/4 in OD connections with a Compression x Compression configuration. This NSF 14 Listed…
SKU 3G-OTH-473860
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The JACO Union Compression Connector is a polypropylene compression tube fitting in a 5-pack, designed for 1/4 in OD x 1/4 in OD connections with a Compression x Compression configuration. This NSF 14 Listed component (MPN 15-4-P-PG) is supplied by 3G Electric, which interprets customer demand and delivers genuine industrial equipment across 14 departments, with specialist depth in combustion, pumps and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a JACO Union Compression Connector used for?
The JACO Union Compression Connector joins two 1/4 in OD tubes in a straight line using compression fittings. It is commonly used in potable water, pneumatic, and low-pressure fluid systems where a leak-tight, removable connection is needed. The polypropylene construction resists corrosion and chemicals.
What are the specifications of the JACO 15-4-P-PG compression connector?
This JACO fitting has a 1/4 in OD x 1/4 in OD size with Compression x Compression ends, sold in a 5-pack. It is made of polypropylene and is NSF 14 Listed for potable water contact. The manufacturer part number is 15-4-P-PG.
Where to buy JACO compression fittings in worldwide?
3G Electric supplies the JACO 15-4-P-PG union compression connector to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on this NSF 14 Listed fitting.
How to install a JACO polypropylene compression fitting?
Cut the tube square, deburr the end, and slide the nut and ferrule onto the tube. Insert the tube fully into the JACO fitting body, then hand-tighten the nut. Use a wrench for an additional 1/4 to 1/2 turn. Do not overtighten, as polypropylene can crack. Always check for leaks after pressurizing.
Digunakan dalam
Aplikasi umum untuk JACOJACO Produk
3G Electric memasok JACO polypropylene compression tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









