JACO Union Compression Elbow: 1/4 in OD x 1/4 in OD Size, Compression x Compression
The JACO Union Compression Elbow is a polypropylene compression tube fitting in a 1/4 in OD x 1/4 in OD size, configured as compression x compression in a 5-pack (MPN 50-4-P-PG). It is NSF 14 Listed, ensuring…
SKU 3G-OTH-474005
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The JACO Union Compression Elbow is a polypropylene compression tube fitting in a 1/4 in OD x 1/4 in OD size, configured as compression x compression in a 5-pack (MPN 50-4-P-PG). It is NSF 14 Listed, ensuring compliance with recognized standards for potable water systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a JACO Union Compression Elbow used for?
The JACO Union Compression Elbow connects two 1/4 in OD polypropylene tubes at a 90-degree angle in potable water systems. Its NSF 14 Listing confirms compliance with recognized standards for drinking water applications, making it suitable for plumbing, filtration, and fluid-handling setups.
What are the specifications of the JACO 50-4-P-PG?
The JACO 50-4-P-PG is a polypropylene compression tube fitting with a 1/4 in OD x 1/4 in OD size, compression x compression configuration, sold in a 5-pack. It is NSF 14 Listed for potable water compliance. The union elbow design allows easy disconnection without disturbing tubing runs.
Where to buy JACO compression fittings in worldwide?
3G Electric supplies JACO compression fittings like the 50-4-P-PG to worldwide customers. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this NSF 14 Listed polypropylene union elbow.
How to install a JACO polypropylene compression elbow?
Cut the 1/4 in OD tube square, deburr the end, and slide the nut and ferrule onto the tube. Insert the tube fully into the JACO elbow body, then hand-tighten the nut until snug. Avoid over-tightening to prevent cracking the polypropylene. Always verify NSF 14 compliance for potable water use.
Digunakan dalam
Aplikasi umum untuk JACOJACO Produk
3G Electric memasok JACO polypropylene compression tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









