Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JAMESON Non-Conductive Conduit Rodder, 1,000 ft, 1/2 in Tape, 44 in Case - Non-Conductive Conduit Rodders
JAMESONNon-Conductive Conduit Rodders

JAMESON Non-Conductive Conduit Rodder, 1,000 ft, 1/2 in Tape, 44 in Case

JAMESON Marked Fish Tape adalah alat conduit rodders non-konduktif dengan panjang 1.000 ft dan lebar tape 1/2 in, dirancang untuk instalasi kabel di saluran listrik. Tipe round fiberglass dengan frame case…

SKU 3G-OTH-407198

Juga terdaftar sebagai: 11381000M · 11 38 1000M

Merek
JAMESON
Item
Non-Conductive Conduit Rodder, 1,000 ft, 1/2 in Tape, 44 in Case
Kategori
Non-Conductive Conduit Rodders
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JAMESON
Manufacturer Part Number
11-38-1000M
Type
Round, Fiberglass, Frame Case
Tape Wd
1/2 in
Case Dia
44 in

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JAMESON Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

JAMESON Marked Fish Tape adalah alat conduit rodders non-konduktif dengan panjang 1.000 ft dan lebar tape 1/2 in, dirancang untuk instalasi kabel di saluran listrik. Tipe round fiberglass dengan frame case berdiameter 44 in memudahkan penarikan kabel di area yang sulit dijangkau. Produk ini cocok untuk teknisi listrik dan kontraktor yang membutuhkan solusi penarikan kabel yang aman dan efisien.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi JAMESON Marked Fish Tape?

JAMESON Marked Fish Tape memiliki panjang 1.000 ft, lebar tape 1/2 in, tipe round fiberglass dengan frame case berdiameter 44 in. Produk ini non-konduktif, sehingga aman digunakan di area dengan risiko listrik.

Untuk apa JAMESON Marked Fish Tape digunakan?

JAMESON Marked Fish Tape digunakan sebagai conduit rodders untuk menarik kabel listrik melalui pipa saluran (conduit) yang panjang dan berliku. Desain non-konduktifnya meminimalkan risiko sengatan listrik saat instalasi.

Di mana beli JAMESON Marked Fish Tape di Indonesia?

Anda dapat membeli JAMESON Marked Fish Tape melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan pengiriman lancar ke lokasi Anda.

Bagaimana cara memilih JAMESON Marked Fish Tape yang tepat?

Pilih JAMESON Marked Fish Tape berdasarkan panjang yang dibutuhkan, misalnya 1.000 ft untuk proyek besar. Pastikan lebar tape 1/2 in sesuai dengan diameter conduit Anda. Tipe round fiberglass dengan frame case berdiameter 44 in memudahkan penyimpanan dan penggunaan.

Digunakan dalam

Aplikasi umum untuk JAMESON
Telecommunications line maintenance — JAMESON PH-14-PKG tree pruner for clearing branches near overhead cables
Cable pulling in conduit — JAMESON 7-8-IK glow rod set for fishing wires through tight spaces
Utility pole inspection — JAMESON TP-125N telescoping measuring pole for reaching and measuring overhead equipment
Tree pruning for right-of-way clearance — JAMESON FG-6PKG-1 pole saw with 13-inch blade for cutting branches up to 1-1/5 inches
Field repair of rod sets — JAMESON 6-14-AK ferrule repair kit for replacing damaged eyelets on fiberglass rods
Aerial saw blade storage — JAMESON HS-13SL leather scabbard for safe transport of pole saw blades

JAMESON Produk

3G Electric memasok JAMESON non-conductive conduit rodders. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This ferrule repair kit is used to replace damaged eyelets on fish tape, enabling continued wire pulling through conduit. The kit includes replacement ferrules 8 inches in length, a 1/2-inch measuring fiberglass rod, and three emery cloths for repair and maintenance tasks
JAMESON
This ferrule repair kit is used to replace damaged eyelets on fish tape, enabling continued wire pulling through conduit. The kit includes replacement ferrules 8 inches in length, a 1/2-inch measuring fiberglass rod, and three emery cloths for repair and maintenance tasks
This 35 ft glow rod set is used for pulling wire through walls, ceilings, and conduit in electrical and low-voltage installations. It includes multiple rod sections for flexible routing. The rods have a 3/16 in diameter and support a minimum wire capacity of 10 AWG
JAMESON
This 35 ft glow rod set is used for pulling wire through walls, ceilings, and conduit in electrical and low-voltage installations. It includes multiple rod sections for flexible routing. The rods have a 3/16 in diameter and support a minimum wire capacity of 10 AWG
This non-conductive conduit rodder features 250 ft of 3/16 in wide round fiberglass tape housed in a 17 in diameter reel stand case. Designed for pulling wire through conduit, it is suitable for long-run installations where non-conductive tools are required for safety
GREENLEE
This non-conductive conduit rodder features 250 ft of 3/16 in wide round fiberglass tape housed in a 17 in diameter reel stand case. Designed for pulling wire through conduit, it is suitable for long-run installations where non-conductive tools are required for safety
Glow rod set for pulling wire through walls, ceilings, and conduit. Total length 24 ft, composed of two 3 ft sections. Rod diameter 1/4 in, supports wire capacities from 10 AWG minimum. Includes bullet nose with eyelet and hook accessories
JAMESON
Glow rod set for pulling wire through walls, ceilings, and conduit. Total length 24 ft, composed of two 3 ft sections. Rod diameter 1/4 in, supports wire capacities from 10 AWG minimum. Includes bullet nose with eyelet and hook accessories
This glow rod set comprises four 5 ft sections that connect to form a total length of 20 ft, with a rod diameter of 3/16 in. It is designed for pulling electrical wire through conduit, walls, and ceilings, accommodating wire sizes from 10 AWG minimum up to 24 AWG maximum
JAMESON
This glow rod set comprises four 5 ft sections that connect to form a total length of 20 ft, with a rod diameter of 3/16 in. It is designed for pulling electrical wire through conduit, walls, and ceilings, accommodating wire sizes from 10 AWG minimum up to 24 AWG maximum
This glow rod set includes a 30 ft rod and a 5 ft section, each with a 3/16 in diameter. Designed for pulling or guiding wires through walls, ceilings, and conduit, it accommodates wire sizes from 10 AWG minimum. The set comes with Ball Chain Bullet Nose Accessories to facilitate snag-free routing
JAMESON
This glow rod set includes a 30 ft rod and a 5 ft section, each with a 3/16 in diameter. Designed for pulling or guiding wires through walls, ceilings, and conduit, it accommodates wire sizes from 10 AWG minimum. The set comes with Ball Chain Bullet Nose Accessories to facilitate snag-free routing

Lainnya dari JAMESON

Lihat semua JAMESON suku cadang →
This non-conductive conduit rodder features a round fiberglass construction and a 400 ft length, housed in a Frame case with a 26 1/2 in case diameter. It is used for pulling wires through conduit in electrical installations
JAMESON
This non-conductive conduit rodder features a round fiberglass construction and a 400 ft length, housed in a Frame case with a 26 1/2 in case diameter. It is used for pulling wires through conduit in electrical installations
This non-conductive conduit rodder features 600 ft of round fiberglass tape with a 3/8 in width, housed in a 32 in diameter frame case. Designed for pulling wires through conduit systems, the tape is marked for length measurement during installation
JAMESON
This non-conductive conduit rodder features 600 ft of round fiberglass tape with a 3/8 in width, housed in a 32 in diameter frame case. Designed for pulling wires through conduit systems, the tape is marked for length measurement during installation
This non-conductive conduit rodder features a 300 ft round fiberglass tape with 3/16 in width, housed in a 17 in diameter frame case. It is used for pulling wires through conduit, raceways, and walls in electrical installations
JAMESON
This non-conductive conduit rodder features a 300 ft round fiberglass tape with 3/16 in width, housed in a 17 in diameter frame case. It is used for pulling wires through conduit, raceways, and walls in electrical installations
Round fiberglass tape, 400 ft length, 1/4 in width, housed in a frame case with 24 in diameter. Non-conductive for pulling wires through conduit systems in electrical installations
JAMESON
Round fiberglass tape, 400 ft length, 1/4 in width, housed in a frame case with 24 in diameter. Non-conductive for pulling wires through conduit systems in electrical installations